New IC Manufacturing Lines to Boost Total Industry Wafer Capacity 8%

发布时间:2018-02-12 00:00
作者:Ameya360
来源:icinsights
阅读量:956

  Wafer capacity growth of 8% forecast for 2018 and 2019 versus 4.8% average yearly growth from 2012-2017.

  IC industry wafer capacity, specifically in the memory segment, was inadequate to meet demand throughout 2017. However, with Samsung, SK Hynix, Micron, Intel, Toshiba/WD, and XMC/Yangtze River Storage Technology planning to significantly ramp up 3D NAND flash capacity over the next few years, and Samsung and SK Hynix boosting DRAM capacity this year and next, what does this mean for total industry capacity growth?  In its 2018-2022 Global Wafer Capacity report, IC Insights shows that new manufacturing lines are expected to boost industry capacity 8% in both 2018 and 2019 (Figure 1).  From 2017-2022, annual growth in IC industry capacity is forecast to average 6.0% compared to 4.8% average growth from 2012-2017.

New IC Manufacturing Lines to Boost Total Industry Wafer Capacity 8%

  Figure 1

  Large swings in the addition or contraction of wafer capacity by the industry, as a whole, appear to be moderating. Since 2010, annual changes in wafer capacity volume have been in the relatively narrow range of 2-8%, with the largest year-to-year difference being just three percentage points.  This suggests that IC manufacturers are better today than in years past about trying to match supply with demand.  It’s still an incredibly difficult task for companies to gauge how much capacity will be needed to meet demand from customers, especially given the time it takes a company to move from the decision to build a new fab to that fab being ready for mass production.

  Many companies, DRAM and NAND flash suppliers in particular, have become much more active with new fab construction and expansion projects at existing fabs.  This surge in activity comes after four years (2014-2017) when capacity growth lagged wafer start volume increases.  During the past few years, IC producers have worked to increase utilization rates from the low levels in 2012-2013.

  If all the new fab capacity expected to be brought on-line in 2019 happens as planned, the volume of capacity added that year will approach the record set in 2007.  Figure 2 shows more that 18 million wafers per year of new capacity is expected to be added in 2019, and this number even assumes some of the massive DRAM and NAND fabs being built by Chinese companies will not be carried out quite as aggressively as has been advertised.  IC Insights believes that construction of these China-owned fabs is progressing slower than planned.

New IC Manufacturing Lines to Boost Total Industry Wafer Capacity 8%

  Figure 2

  Report Details: Global Wafer Capacity 2018-2022

  IC Insights’ Global Wafer Capacity 2018-2022—Detailed Analysis and Forecast of the IC Industry’s Wafer Fab Capacity report assesses the IC industry’s capacity by wafer size, minimum process geometry, technology type, geographic region, and by device type through 2022. The report includes detailed profiles of the companies with the greatest fab capacity and gives comprehensive specifications on existing wafer fab facilities. Global Wafer Capacity 2018-2022 is priced at $4,490 for an individual user license.  A multi-user worldwide corporate license is available for $7,190.


(备注:文章来源于网络,信息仅供参考,不代表本网站观点,如有侵权请联系删除!)

在线留言询价

相关阅读
IC Purchasing:TOP 10 global passive components manufacturers
  Passive components are a part of electronic circuits, which are mainly divided into two categories: RCL and RF components. RCL accounts for about 90% of the total output value of passive components, and the market scale is very large, reaching as high as 27.7 billion USD, of which capacitors account for 73% of the total output value, inductors account for 10% of the total output value, and resistors account for 17% of the total output value. The passive component industry has huge room for development.  In this article, here are the top 10 global passive components manufacturers as follows.  一、Murata  Headquarters: Kyoto, Japan  Established time: 1944  Founded in 1944 and located in Japan, Murata is one of the world’s leading electronic components manufacturers. Its business includes four categories: capacitors, piezoelectric products, other components and modules.Its customers are distributed in the fields of PC, mobile phone, and automotive electronics.  二、Samsung Electro-Mechanics  Headquarters: Suwon-si, South Korea  Established time: 1973  Established in 1973, Samsung Electro-Mechanics has become a remarkable developer and manufacturer of key electronic components not only in Korea but also in other parts of the world. In the 1990s, it focuses on developing promising next-generation products such as chip parts, mobile communication parts, and optical parts.  三、Yageo  Headquarters: Taiwan, China  Established time: 1977  Founded in 1977, Yageo is a world-leading passive component service provider with production and sales offices covering Asia, Europe and America. Yageo is the world’s largest manufacturer of chip resistors (R-Chip), the largest manufacturer of tantalum capacitors, and the third largest supplier of multilayer ceramic capacitors (MLCC).  四、Taiyo Yuden  Headquarters: Tokyo, Japan  Established time: 1950  founded in 1950. Starting from capacitors, it has been committed to the research, development, production and sales of various electronic components such as inductors, FBAR/SAW devices, circuit modules, and energy devices. Its products are mainly divided into four categories, namely capacitors, ferrite and application products, integrated modules and equipment, and other products.  五、NipponChemi-con  Headquarters: Tokyo, Japan  Established time: 1931  Since its establishment in 1931, Nippon Chemi-Con has tackled the development of a variety of electronic components, starting with aluminum electrolytic capacitors. Taking advantage of many element technologies obtained from aluminum electrolytic capacitors production, it has been expanding its business field to multilayer ceramic capacitors, film capacitors, metal oxide varistors, choke coils, circuits, electro-mechanical parts, and optomechatronics.  六、Nichicon  Headquarters: Kyoto, Japan  Established time: 1950  Founded in 1950, Nichicon Corporation is a manufacturer of capacitors of various types, and is one of the largest manufacturers of capacitors in the world, headquartered in Karasuma Oike, Nakagyō-ku, Kyoto, Japan. Its product ranges include Aluminum electrolytic capacitors, Plastic film capacitors, Small Li-Ion Rechargeable Batteries, Positive thermistors “Posi-R”, and Vehicle-to-Home (V2H) systems, etc,.  七、TDK  Headquarters: Tokyo, Japan  Established time: 1935  Founded in 1935, TDK is a comprehensive electronic components manufacturer leading the world in magnetic technology. In addition to ceramic capacitors, electrolytic aluminum capacitors, and film capacitors, TDK also provides a wide range of passive components such as magnetic components, high-frequency components, piezoelectric components, and protection devices.  八、Walsin Technology  Headquarters: Taiwan, China  Established time: 1992  Incorporated in 1992, Walsin Technology Corporation is the world’s leading manufacturer of passive components with a one-stop-shop product portfolio and worldwide delivery platform. The company’s product lineup includes multiple-layer ceramic capacitors (MLCC)/array, chip-resistor/array & networks, inductors, RF filters, disc capacitor, varistor, chip fuse, and antenna, etc.  九、Rubycon  Headquarters: Nagano Prefecture, Japan  Established time: 1952  Rubycon is one of the original pioneers in the aluminum capacitor market and is one of the largest suppliers of miniature electrolytic capacitors. As a Japanese electronics company, its main products are electrolytic capacitors, film capacitors and power supply units with a wide range of applications including consumer, industrial, power, lighting and automotive.  十、Kyocera  Headquarters: Kyoto, Japan  Established time: 1959  Founded in 1959, Kyocera id specialized in the R&D and production of precision ceramics at the beginning of its establishment. It focuses on ceramic technology and horizontally expanding precision ceramic components, including ceramic multilayer packaging products for ICs, the acquisition of Elco to enter the connector field, and the acquisition of AVX to consolidate its strength in the field of MLCC and other passive components.
2023-08-25 15:22 阅读量:2329
Only Qualcomm Reported to Post Slight Decline Among Top Ten Fabless IC Design Houses by 3Q18 Revenue
TrendForce announced the ranking of top 10 fabless IC design houses worldwide based on their revenues for 3Q18, among which Qualcomm was the only one to post a slight decline. The other nine companies all registered year-on-year growth in their revenue, driven by segments like networking, data center, automotive application and consumer electronics.Taiwan-based IC design houses in the ranking, including MediaTek, Novatek, and Realtek, showed remarkable performances in the third quarter due to stock-up demand from consumer electronics makers for the upcoming holiday sales. MediaTek has recovered from the revenue decline since the second quarter this year and grew by 3% in the third quarter.However, the only company in the ranking to see a drop was Qualcomm with a revenue decline of 0.1% YoY in 3Q18, “Qualcomm has adopted an aggressive product strategy, introducing five new processors with different market positioning by the end of the third quarter,” says senior analyst CY Yao from TrendForce. Its comprehensive product ranges also contributed to the shipment growth. However, the slowdown in the global smartphone market has resulted in lower prices, leading to a drop in Qualcomm’s revenue.The largest move upward in the revenue growth came from NVIDIA, which benefited from strong momentum in segments like gaming, professional vision, data center and automotive applications. Particularly, a remarkable revenue growth of 65.3% YoY was recorded for NVIDIA’s data center IC business in the third quarter.Following NVIDIA, Marvell registered the second highest revenue growth. After the acquisition of Cavium, Marvell’s revenue increased by 28.2% YoY in the third quarter, which brought Marvell to the sixth place in the ranking, surpassing Xilinx.The design houses headquartered in Taiwan kept pursuing better performances during the past quarter. MediaTek registered a rise of 3% YoY in sales in 3Q18, thanks to its continuous adjustments in product mixes. The company has allocated more capacity to its products on 12nm process and improved the cost structure of processors. It turned out to achieve a gross margin of 38.5% in the third quarter, the highest quarterly margin since 2016. On the other hand, Novatek’s SoC products received wider market reception, benefited from the favorable demand from global TV market. As for Realtek, it showed a growth of 7.9% YoY in the third quarter, driven by the growing networking market in China and the coming of year-end sales.Looking ahead to 4Q18 and 1Q19, Qualcomm will continue to deploy its aggressive product strategy in segments like RF transceiver components, automotive electronics and the Internet of Things. However, it remains to be seen whether the product adjustments can moderate the loss brought by the slowdown in the global smartphone market, says Yao. On the other hand, MediaTek has entered a period of stable development after one year of adjustments in operation and product portfolio, despite the impacts from lower smartphone sales.Despite the highest revenue growth among the top IC design houses, NVIDIA was short of the market expectations in terms of the results of revenue due to the lower-than-expected gaming sales. The gaming segment always contributes to the majority of NVIDIA’s revenue. For instance, graphics cards for gaming represent 60% of the company’s sales in 3Q18. However, the decreasing demand for cryptocurrency mining has resulted in excess Pascal mid-range gaming card inventory in the channel. In response, NVIDIA is bound to clear out inventory as soon as possible to facilitate the better sales of its new graphics cards with Turing architecture GPU. Therefore, NVIDIA may anticipate a period of adjustment in the near future with the revenue outlook impacted, as a result from selling the excess channel inventory of midrange Pascal products.
2018-11-22 00:00 阅读量:1070
Seven IC products to outpace total 16% IC market growth in 2018
In its Mid-Year Update to the 2018 McClean Report, IC Insights updated its forecast of sales growth for each of the 33 major IC product categories defined by WSTS (Figure 1).  IC Insights now projects that seven product categories will exceed the 16% growth rate expected from the total IC market this year. For the second consecutive year, the DRAM market is forecast to top all IC product segments with 39% growth. Overall, 13 product categories are forecast to experience double-digit growth and 28 total IC product categories are expected to post positive growth this year, down slightly from 29 segments in 2017.Rising average selling prices for DRAM continued to boost the DRAM market through the first half of the year and into August.  However, IC Insights believes the DRAM ASP (and subsequent market growth) is at or near its peak, as a big rise in DRAM capital expenditures for planned capacity upgrades and expansions is likely put the brakes on steep market growth beginning in 2019.In second place with 29% growth is the Automotive—Special-Purpose Logic market, which is being lifted by the growing number of onboard electronic systems now found on new cars. Backup cameras, blind-spot (lane-departure) detectors, and other “intelligent” systems are mandated or are being added across all new vehicles—entry level to luxury—and are expected to contribute to the semiconductor content per new car growing to more than $540 per vehicle in 2018.Wireless Comm—Application-Specific Analog is forecast to grow 23% in 2018, as the world becomes increasingly dependent on the Internet and demand for wireless connectivity continues to rise. Similarly, demand for medical/health electronics systems connectivity using the Internet will help the market for Industrial/Other Application-Specific Analog outpace total IC market growth in 2018.Among the seven categories showing better than total IC market growth this year, three are forecast to be among the largest of all IC product categories in terms of dollar volume. DRAM (#1 with $101.6 billion in sales), NAND Flash (#2 with $62.6 billion), Computer and Peripherals—Special Purpose Logic (#4 with $27.6 billion) prove that big markets can still achieve exceptional percentage growth.
2018-09-19 00:00 阅读量:995
Cadence unveils first analogue IC design-for-reliability solution
  Cadence Design Systems has introduced the Legato Reliability Solution, the industry’s first software product that looks to address the challenges associated with designing high-reliability analogue and mixed-signal integrated circuits (ICs).  Whether for automotive, medical, industrial, and aerospace and defence applications, the Legato Reliability Solution is able to provide analogue designers with a range of new tools to better manage their design’s reliability throughout the entire lifecycle, from initial test through active life through aging.  Based on Cadence’s Spectre Accelerated Parallel Simulator and the Virtuoso custom IC design platform, Legato integrates capabilities into an intuitive cockpit to address the reliability concerns of the three phases of the product lifecycle, these include:  Analogue defect analysis accelerates analogue defect simulation by up to 100X, reducing test cost and eliminating test escapes, the main source of early failure in IC designs.  Cadence has introduced a simulation engine to enable a new test methodology for analogue ICs. Called defect-oriented testing, it expands the capabilities of test far beyond what is traditionally achieved by just performing functional and parametric tests.  Defect-oriented testing allows designers to evaluate the ability to eliminate die with manufacturing defects and resulting test escapes that cause field failures. It can also be used to optimise wafer test, reducing the number of tests required to achieve the target defect coverage by eliminating over-testing and potentially reducing the number of tests up to 30 percent.  Customer experience with the tool indicates that it accelerates defect simulation by more than 100X.  Electro-thermal analysis avoids premature failures due to thermal overstress during the product’s useful life.  Cadence has introduced a dynamic electro-thermal simulation engine. For automotive designers, for example, actual usage results in significant temperature rise during normal operation due to on-chip losses and power dissipated in the switches. In addition, these components need to operate in hostile environments under the hood of an automobile.  The combination of high-power dissipation in a high-temperature environment can result in thermal overstress that can result in failure during normal operation. Dynamic electro-thermal simulation will allow designers to simulate the on-chip temperature rise and validate the operation of over temperature protection circuits.  Advanced aging analysis enables accurate prediction of product wear-out by analyzing aging acceleration due to temperature and process variation.  With existing technologies, like RelXpert and AgeMOS, to analyse the device degradation due to electrical stress, Cadence has sought to enhance aging analysis and Legato will now include the effects that accelerate device wear-out including temperature and process variation.  Legato will also provide a new aging model for device degradation in advanced nodes with FinFET transistors.  “Designing the chips to meet requirements across the entire product lifecycle has become a huge challenge,” said Tom Beckley, Cadence senior vice president and general manager, custom IC and PCB Group. “Designers are faced with the challenge of designing across the entire lifecycle, including eliminating the test escapes that become field failures early in the life cycle, preventing thermal overstress from operating in extreme conditions like under the hood of a car, and designing for 15 years or more of operating lifetime. Our new Legato Reliability solution enables designers to answer these critical questions much earlier in the design process.”
2018-05-11 00:00 阅读量:1452
  • 一周热料
  • 紧缺物料秒杀
型号 品牌 询价
RB751G-40T2R ROHM Semiconductor
MC33074DR2G onsemi
TL431ACLPR Texas Instruments
BD71847AMWV-E2 ROHM Semiconductor
CDZVT2R20B ROHM Semiconductor
型号 品牌 抢购
BU33JA2MNVX-CTL ROHM Semiconductor
STM32F429IGT6 STMicroelectronics
IPZ40N04S5L4R8ATMA1 Infineon Technologies
ESR03EZPJ151 ROHM Semiconductor
BP3621 ROHM Semiconductor
TPS63050YFFR Texas Instruments
热门标签
ROHM
Aavid
Averlogic
开发板
SUSUMU
NXP
PCB
传感器
半导体
相关百科
关于我们
AMEYA360微信服务号 AMEYA360微信服务号
AMEYA360商城(www.ameya360.com)上线于2011年,现 有超过3500家优质供应商,收录600万种产品型号数据,100 多万种元器件库存可供选购,产品覆盖MCU+存储器+电源芯 片+IGBT+MOS管+运放+射频蓝牙+传感器+电阻电容电感+ 连接器等多个领域,平台主营业务涵盖电子元器件现货销售、 BOM配单及提供产品配套资料等,为广大客户提供一站式购 销服务。

请输入下方图片中的验证码:

验证码