AMEYA360:Industrial Shields WEIDOS MKR1010/ESP32 Based PLC Controllers-Ameya360电子元器件采购网

AMEYA360:Industrial Shields WEIDOS MKR1010/ESP32 Based PLC Controllers

发布时间：2023-05-09 10:25

作者：AMEYA360

来源：网络

阅读量：1846

　　WEIDOS MKR1010/ESP32 Based PLC Controllers are designed for simple control and data storage applications in installations. These PLC controllers incorporate different communications for use in IoT solutions. The WEIDOS PLC controllers come in two main CPU variants, the MKR1010 and the ESP32.

AMEYA360:Industrial Shields WEIDOS MKR1010/ESP32 Based PLC Controllers

These PLC controllers operate within the 11.4VDC to 25.4VDC voltage range and 0°C to 60°C temperature range. The WEIDOS PLC controllers measure 114mm x 46mm x 127mm (H x W x H) and weigh around 350g. These controllers are RoHS, LVD, EMC, and RED compliant.

　　FEATURES

　　CPU:

　　CPU type:

　　Arduino MKR1010

　　Espressif ESP32

　　Memory:

　　Arduino: 256kB (internal) - CPU FlashMemory and 32kB - SRAM

　　ESP32: 448kB - ROM, 520kB - SRAM, and 16kB - SRAM in RTC

　　512kB EEPROM

　　IP20 protection rating

　　Communication interfaces:

　　External buses available:

　　Ethernet

　　I2C

　　SPI

　　RS485 half-duplex or UART interface (configurable via DIP switches)

　　Wireless communications:

　　BLUETOOTH? and Wifi in all references

　　LoRa, GPRs, and NBIoT, depending on the reference

　　SPECIFICATIONS

　　Power Supply:

　　1.4VDC to 25.4VDC operating voltage range

　　30W maximum power

　　Environmental Conditions:

　　0°C to 60°C operating temperature range

　　-20°C to 60°C storage temperature range

　　An environment with no corrosive gas

　　10% to 90% (non-condensation) operating humidity

　　114mm x 46mm x 127mm (H x W x H) dimensions

　　350g weight

　　Directives:

　　RoHS

　　LVD

　　EMC

　　RED

（备注：文章来源于网络，信息仅供参考，不代表本网站观点，如有侵权请联系删除！）

Trade news

AMEYA360:ASML Ban Affects China’s Advancement in Chips

　　As part of an agreement between the U.S. government, the Netherlands, and Japan, ASML, Nikon, and Tokyo Electron won’t be supplying their high-end photolithography equipment to Chinese companies.　　According to the Wall Street Journal, “the Netherlands will bar ASML Holding NV, a Dutch maker of photolithography machines, from selling to China at least some immersion lithography machines, the most advanced kind of gear in the company’s deep ultraviolet lithography line.”　　ASML manufactures all of the world’s extreme ultraviolet lithography machines, which are critical for producing cutting-edge semiconductors.　　China could easily circumvent the export bans for advanced semiconductors, as it has been doing for many years. Acquiring huge lithography machines is much more difficult, and making them from scratch is nearly impossible. Furthermore, only a few hundred of those machines are sold every year, making it much easier to control their destination.　　ASML bans chip making equipment to China　　It is unknown how much of that critical equipment has already been sold to China and what capacity Chinese companies already have to produce the most advanced semiconductors.　　While China is unlikely to have the technology to produce sub-10nm chips, it is already investing in new fabs. Currently, only Taiwan’s TSMC can produce 5nm technology. To do that, it requires the advanced lithography machines that ASML has.　　Lithography in the U.S.　　A lithography system is a projection system. Light is projected through a blueprint of the pattern to print (known as a ‘mask’ or ‘reticle’). This process will be repeated 100 times or more, laying patterns on top of patterns to make a complete microchip.　　This crucial technology was discovered in 1957 by Jay Lathrop and James Nall, of the U.S. Army’s Diamond Ordnance Fuse Laboratories in Maryland. They patented the photolithographic techniques used to deposit thin-film metal strips about 200 micrometers wide to connect discrete transistors on a ceramic substrate.　　In 1959 Lathrop joined Texas Instruments, and Nall went to Fairchild Semiconductor. In 1958, engineers at Fairchild built one of the first “step-and-repeat” cameras to easily copy and multiply transistors on a single wafer using photolithography.　　In the early 1980s, GCA Corp. was considered the worldwide leader in photolithography and celebrated as one of the “hottest high-technology companies.” They invented the wafer stepper (the step-and-repeat camera), a device similar to a slide projector or a photographic enlarger, enabling further reductions in chip size. It was the first technology to exceed the 1-micron limit.　　At the time, Japanese competitors Nikon and Canon were catching up quickly and making bold technological investments. While American lithography companies were holding back in capital expenditures until they had a deal with semiconductor manufacturers, the Japanese worked hand-in-hand with them to define roadmaps and coordinate the delivery of new equipment.　　“It was impossible to make semiconductors without lithography tools, but the only remaining U.S. producers were struggling to survive,” wrote Chris Miller in Chip War: The Fight for the World’s Most Critical Technology.　　In 1993, after receiving at least $60 million in funds from the government-backed Sematech consortium, GCA closed its factory in Massachusetts as it could not compete with ASML, Nikon, and Canon.　　ASML can’t meet demand　　While other lithography manufacturers can print 10nm patterns, ASML’s EUV (extreme ultraviolet) technology enables the scale of the smallest feature to be reduced below that limit. That’s why they hold 100 percent of the market for the most advanced lithography machines.ASML Ban Affects China’s Advancement in Chips　　Recently, ASML reported revenues of $23 billion and $6.05 billion in net income for FY2022. The Dutch company sold 317 new and 28 used lithography systems to their customers. They expect an increase of 25 percent in net sales for FY2023.　　“For 2023, ASML expects continued strong growth with a net sales increase of more than 25 percent and a slight improvement in gross margin, relative to 2022. We expect first-quarter net sales between €6.1 billion and €6.5 billion with a gross margin between 49 percent and 50 percent,” said ASML President and CEO Peter Wennink.　　The new restrictions on exporting equipment to China won’t hurt the company’s bottom line, as the demand from Taiwan, Europe, and the U.S. will continue to grow.　　China might retaliate　　Chip-making equipment is critical for China’s ambitions to lead in artificial intelligence and quantum computing technologies.　　While it would be possible for large Chinese companies to source state-of-the-art chips and build new systems abroad, not being able to design and manufacture advanced semiconductors in mainland China is a step back in their ambitions.　　The Chinese government has not issued any comment yet on the new restrictions, but it will likely react. One possibility is trade restrictions on Western businesses.

2023-05-11 11:05 阅读量：2964

型号	品牌	询价
RB751G-40T2R	ROHM Semiconductor
TL431ACLPR	Texas Instruments
BD71847AMWV-E2	ROHM Semiconductor
MC33074DR2G	onsemi
CDZVT2R20B	ROHM Semiconductor

型号

品牌

询价

ROHM Semiconductor

Texas Instruments

ROHM Semiconductor

onsemi

ROHM Semiconductor

型号	品牌	抢购
ESR03EZPJ151	ROHM Semiconductor
BP3621	ROHM Semiconductor
BU33JA2MNVX-CTL	ROHM Semiconductor
IPZ40N04S5L4R8ATMA1	Infineon Technologies
TPS63050YFFR	Texas Instruments
STM32F429IGT6	STMicroelectronics

型号

品牌

抢购

ROHM Semiconductor

ROHM Semiconductor

ROHM Semiconductor

Infineon Technologies

TPS63050YFFR