Fibocom’s 5G RedCap Module Solution to Ensure the Predictable Growth of 5G FWA

发布时间:2024-01-05 16:11
作者:AMEYA360
来源:Fibocom
阅读量:2178

  Introduction

  The latest statistic from GSA’s 5G Infographic reveals that as of August 2023, there were 265 commercial 5G launches globally, and 543 operators are investing in 5G network rollout. Driven by technological innovations, it is expected to add new 5G network deployments in more than 30 countries in 2023, most of which will be 5G standalone networks. While the operators are propelling the implementation of 5G infrastructure, the adoption of 5G applications will be presented in a more mature business model for consumers, and enterprises to engage in the beneficiary bandwidth and millisecond latency.

  Another statistic from GSA has identified 535 operators from 186 countries and territories are providing FWA service using LTE or 5G worldwide. These powerful figures also mark the stance of FWA as the "Killer App" in 5G's commercialization attributed to the rapid deployment in recent years.

  Why RedCap and How to Position the Role in the FWA Market?

  The evolution of 5G technology is an ongoing process, from 3GPP Release 15 to 17, every evolution empowers 5G with multiple advancements. RedCap was introduced under the category of 5G NR in 3GPP Release 17 but leveraged fewer 5G NR capabilities for the balance of 5G functions and costs. This new tier of 5G will technically contribute to the acceleration of the 5G use cases adoption rate by providing optimized hardware design, extended battery life, lower power consumption and better spectrum utilization.

Fibocom’s 5G RedCap Module Solution to Ensure the Predictable Growth of 5G FWA

  Source: Ericsson FWA Handbook 2023 Edition

  FWA (Fixed Wireless Access), is addressed to close the digital divide and offer fiber-like wireless connectivity services eliminating the barriers led by geography locations. 4G FWA has benefited from the comprehensive 4G infrastructure built in the past ten years, the shipment accounted for more than 70% of the total FWA device shipments. Driven by the implementation of 5G network deployments, 5G share is predicted to exceed 4G in the next few years, and the 4G existing market will seek for a 5G solution for smooth transition. Therefore, 5G RedCap is considered to be the ideal solution to take over the 4G FWA market with the multiple enhancements introduced at the beginning.

  Fibocom’s 5G RedCap Module Solution to Ensure the Predictable Growth of 5G FWA

  As the industry-leading provider of wireless modules and solutions, Fibocom launched the 5G RedCap module solution for the global FWA market earlier this year. Integrated with Snapdragon X35 5G Modem-RF, which is the world's 1st 5G NR-Light Modem-RF, Fibocom FG131 is a high-performance RedCap module with a maximum peak rate of up to 226Mbps on the downlink and 121Mbps on the uplink in 5G SA. Furthermore, it is also backward compatible with LTE networks, delivering up to 195Mbps downlink and 105Mbps uplink speed. Adopting an LGA form factor measured at 39.5*37mm, the package ensures the 100% compatibility of Fibocom LTE Cat 6 module series FG101 and FG621, and is also pin-compatible with Fibocom LTE Cat 4 module series, greatly reducing the barriers for customers to replace the 4G FWA devices with the latest 5G technology. Notably, FG131 incorporated numerous hardware innovations by employing a highly-integrated PCB layout, enabling customers' devices to support more frequency bands at a global scale, encompassing regions such as North America, Latin America, Europe, Australia, Japan, China, etc.

Fibocom’s 5G RedCap Module Solution to Ensure the Predictable Growth of 5G FWA

  The simplified design of the 5G RedCap module will ultimately lead to cost optimization. In hardware utilization, FG131 realize the balance of cost performance and end device scalability. Catering to the demand for larger bandwidth and higher throughput in the FWA scenarios, FG131 is equipped with a 1.25Gbps SGMII portal for users to develop the wired connection. Additionally, it expands wireless capability to Wi-Fi 5/Wi-Fi 6 by docking to QCA6174/WCN6856 Wi-Fi chipset via a PCIe 2.0 port. In terms of software comparability, FG131 supports OpenWRT, allowing customer who adapts Open CPU to develop the FWA end devices flexibly. Most importantly, Fibocom FG131 RedCap module shows no compromise on the 5G capability such as network slicing, 5G LAN, which is essential for specific use cases like private networks, industrial automation, mission-critical applications, etc.

  In Conclusion

  Among the plenty of capabilities outlined in the above chapter, 5G RedCap will shine as the spotlight in the FWA industry as it eases the way for customers to build a more competitive terminal based on the up-to-date 5G technologies. Fibocom has the confidence to provide the best-in-class RedCap module solutions to help our customer's FWA devices such as CPE, ODU, mobile hot spot, USB dongle adapt to the transition seamlessly.

(备注:文章来源于网络,信息仅供参考,不代表本网站观点,如有侵权请联系删除!)

在线留言询价

相关阅读
Fibocom Fosters Local 5G AIoT Market with Newly Launched 5G Module FG370-KR at AIoT Korea 2024
  wireless communication modules, announces the launch of FG370-KR, a regional version of the FG370 series module, which is positioned to accelerate the commercial development of Korean’s 5G AIoT industries such as Fixed Wireless Access (FWA), live streaming, and industrial automation, etc. By adopting the advancements from FG370-KR, the solution allows local customers to benefit from the seamless 5G experience and fast-to-market industry solutions.  5G subscribers in South Korea reached around 33 million as of the end of March 2024, according to the latest report from Statista. SK Telecom accounted for 15.9 million of the total 5G subscribers, followed by KT with 9.9 million and LG U+ with 7.2 million. At present, the country accelerates the rollout of commercial 5G services to industry-related field and shows strong growing trends. Fibocom's 5G Sub-6GHz module FG370-KR is compatible with Korea's mainstream 5G frequency bands, supports both 5G SA and NSA network architecture, making it an ideal 5G solution for industry customers that require high-transmission speed, large capacity, and ultra-low latency.  Developed from the MediaTek T830 chipset platform, the FG370-KR is a 3GPP Release 16 compliant module that adopts a 4nm process integrated with an Arm Cortex-A55 quad-core CPU, leading to a 10% improvement in speed performance compared to the previous generation. In terms of data transmission, FG370-KR supports NR 4CA (Carrier Aggregation) with up to 300MHz bandwidth on the downlink, and NR 2CA in FDD and TDD hybrid mode on the uplink, reaches a maximum speed of up to 7.01Gbps DL and 1.25Gbps UL. In addition, it also supports PC2 of HPUE (High Power User Equipment) technology, significantly enhances 5G uplink capability and network coverage. It is worth highlighting that, FG370-KR can greatly reducing the time-to-market of customers’ devices with the support of a wide range of peripheral interfaces, including three PCI-Express, USB 3.2, two USXGMII interfaces along with software features such as Kernel, OpenWRT drivers.  “The launch of the FG370-KR signifies that Fibocom will provide a Korea-dedicated solution for local customers, boosting the 5G adoption towards a larger-scale of industries with optimal network connectivity and enhanced operational efficiency, said Simon Tao, VP of Product Management Dept., Head of MBB BU at Fibocom. “We have the confidence in helping enterprises to accomplish the 5G commercialization with our industry know-how and expertise accumulated, without doubt, Korea’s 5G deployment will keep experiencing a fast-growing rate and Fibocom will continually invest in cutting-edge 5G module solutions and delivering superior wireless experience.”  To learn more about 5G Sub-6GHz module and its demos, welcome to visit Fibocom booth #G101 on the 3rd Floor of Hall D in COEX at the AIoT Korea from October 30 to November 1 2024.
2024-12-13 10:55 阅读量:318
Fibocom Accelerates 5G RedCap FWA Commercialization by Offering Wi-Fi-Ready Solutions
  Shenzhen,China – November 25th 2024 – Fibocom (Stock code: 300638), a global leading provider of wireless communication modules and solutions, today debuts the ready-to-market 5G RedCap plus Wi-Fi 5/6 solution developed from the 5G RedCap module FG131, which is positioned to accelerate the commercialization of 5G FWA in the form of CPE, mobile hot-spot, and USB dongle, etc., satisfying the diverse market demands.  According to a report updated in September 2024, GSA has identified 143 operators in 61 countries and territories worldwide that have been investing in public 5G SA networks through trials, planned or actual deployments. With the implementation of 5G SA network infrastructure, 5G-enabled FWA shipments became mainstream, reaching 10.2 million in 2023. The growth of 5G FWA CPE shipments is expected to accelerate further, accounting for 42% of shipments in 2024 compared with 34% in 2023, according to the CPE Vendor Survey released by GSA in August 2024.The launch of Fibocom’s ready-to-market 5G RedCap plus Wi-Fi 5/6 solution is the ideal 5G lightweight solution accelerating the migration from 4G FWA to 5G FWA, elevating the Quality-of-Service with faster network connection, more-agile network slices services and reliability in 5G SA network environment.  Key takeaways  Advanced 5G RedCap plus Wi-Fi 6 (AX3600): The FG131 5G RedCap module integrates with a Wi-Fi 6 module developed from the Qualcomm WCN6856, reaching maximum 3600Mbps data throughput with the support of 2x2-40MHz@2.4GHz and 2x2-160MHz@5/6GHz dual-band concurrently and the support of 4K QAM for enhanced data transmission efficiency.  Medium 5G RedCap plus Wi-Fi 6 (AX1800): The FG131 5G RedCap module integrates with a Wi-Fi 6 module developed from the Qualcomm QCA2064, reaching maximum 1800Mbps data throughput with the support of 2x2-40MHz@2.4GHz and 2x2-80MHz@5/6GHz dual-band concurrently.  Entry-level 5G RedCap plus Wi-Fi 5: The FG131 5G RedCap module integrates with a Wi-Fi module developed from the Qualcomm QCA6174 through a serial port, delivers maximum 867Mbps speed with the support of dual-band 2.4GHz and 5GHz simultaneously.  Leveraging 5G SA network coverage, optimized power-saving, and reduced complexity, 5G RedCap is gaining more and more attention within the IoT industry. The Fibocom5G RedCap module FG131 offers a high-performance and ultra-reliable wireless solution for application scenarios that are cost-sensitive and power-enduring. Packaged in LGA form factor at the size of 37mm*39.5mm, Fibocom FG131 is pin-compatible with Fibocom LTE Cat 6 module FG101 and FG621 series that allows smooth migration from 4G to 5G RedCap. Compliant with 3GPP Release 17, it supports 5G SA and reaches peak rates of up to 223Mbps downlink and 123Mbps uplink theoretically. With these key features combined, the Fibocom 5G RedCap module FG131 series delivers a new level of 5G network experience while maintaining high reliability and cost-effectiveness, especially for terminal devices used in mobile scenarios. Apart from the hardware optimization, FG131also supports the OpenCPU and OpenWRT software features and an abundant of rich interfaces to realize the flexible and easy integration of FWA devices.
2024-12-11 13:26 阅读量:226
Fibocom Drives the Rapid Growth in the Economics of IoT Scale with Ultra-compact size Cat 1 bis Module MC610-GL at MWC Shanghai 2024
  Fibocom (Stock code: 300638), a global leading provider of IoT (Internet of Things) wireless solutions and wireless communication modules, announces the new member of its LTE Cat 1 bis module portfolio featuring high reliability, ultra-compact size and cost-effectiveness at MWC Shanghai 2024. The MC610-GL is positioned to foster the economics of IoT scale in vertical markets across asset tracking, E-mobility, AMI (Advanced Metering Infrastructure), etc.  The Global Cellular IoT Module market shows a 7% year-over-year (YoY) growth in Q1 2024, according to the latest reports by IoT Analytics. Despite ongoing inventory and demand issues in several other regions globally, technologies like 5G and LTE Cat-1 bis have seen a combined market growth of 67% year-over-year, signifying their substantial contribution to the cellular IoT module market's overall growth. “The statistics have verified Cat 1 bis’ driving forces in bringing affordable and reliable wireless connectivity service to a diversified IoT landscape, even though 5G remains strong performance in the data-intensive scenarios, and Cat 1 bis takes the lead in the mainstream low and medium speed market thanks to the worldwide 4G infrastructure,” said Kevin Guan, Director of MTC Product Marketing at Fibocom. “Without a doubt, we are optimistic in expanding the utilization of Cat 1 bis technology in segment areas and providing the value-added reference design service to industry customers. Looking forward, the MC610-GL is expected to address its top performance in the global market and accelerate the large-scale IoT deployment worldwide.”  Developed from the UNISOC 8910DM platform, the MC610-GL supports major carrier frequency bands worldwide and complies with rich network standards, thus ensuring uninterrupted wireless connection anywhere, anytime, especially catering to asset tracking scenarios. It adopts an ultra-compact LCC+LGA form factor design measured at 24.2 x 26.2 x 2.1mm with dual-mode (4G+2G) supported, providing great convenience for customers to switch from LTE Cat M to Cat 1 bis at the minimum investment. Equipped with rich standard interfaces, the module empowers a wide range of low-to-medium speed IoT industries with up to 10Mbps downlink data transmission rate while conserving significant cost. Leveraging the industry capabilities within Fibocom, customers are catered to the reference design service and support, reducing the lead time to market. In addition, regional versions for EMEA (MC610-EU) and Latin America (MC610-LA) are flexibly adjustable in request to customers’ cost concerns.
2024-07-03 13:57 阅读量:472
Fibocom Launches a Series of On-device AI Solutions for Compute-intensive Applications powered by Qualcomm-based Platforms at Computex 2024
  Inevitably, the adoption of generative AI and LLM (Large Language Model) has fueled more intelligence and efficiency in our lives and works than in the past decade. Moving forward, the demand for running AI and LLM at the edge devices is growing as it provides lower latency, higher privacy, and more flexibility, which is set to redefine the level of intelligence of smart devices as well as broaden the landscape of mobile scenarios.  Taipei, Taiwan – June 7th 2024 – Fibocom (Stock code: 300638), a global leading provider of IoT (Internet of Things) wireless solutions and wireless communication modules, launches a series of on-device AI solutions powered by Qualcomm® QCS8550 and QCM6490 processors from Qualcomm Technologies, Inc. The solutions are designed to satisfy compute-intensive application scenarios such as robotics, automated vehicles, video collaborations, smart retailing, etc., accelerating industrial digitalization and intelligent transformation.  Flagship on-device AI solution powered by Qualcomm QCS8550 processor  Utilizing the powerful Qualcomm QCS8550 processor, Fibocom’s flagship on-device AI solution is designed to deliver strong performance and unparalleled multimedia capabilities. Equipped with an octa-core CPU and an Adreno™ 740 GPU, the solution can support up to 4 concurrent displays, and 8K video encoding and decoding. It serves as a strong core for industries requiring high-definition video playing, fast data analytics and lower latency like automated vehicles, robotics, remote medical surgery, computer vision systems, live streaming, videoconference systems, and more.  Premium on-device AI solution powered by Qualcomm QCM6490 processors, piloting the high-end AIoT market  The solution developed using the Qualcomm QCM6490 processor, features an octa-core processor with high-speed HVX (Hexagon Vector Extension) technology, and a high-performance graphics engine to allow smooth 4K video playing and multi-channel camera inputs. In addition, the solution is capable of allowing a maximum of 5 ISPs (Image Signal Processing) and up to 5-8 camera streams simultaneously, helping customers to ease their concerns on multi-camera deployments as well as dual-screen display scenarios. The solution offers flexible wireless connections such as 5G, Wi-Fi, Bluetooth, and is equipped with a GNSS receiver for precise navigation both indoors and outdoors. In terms of software, the solution supports the mainstream operating systems: Android, Linux, and Windows. Leveraging the computing power of up to 13 TOPS, the solution efficiently helps customers handle data-intensive computation and processing, running various 1.3B/3B/7B open-source LLMs on the device, making it an ideal solution for smart retail, in-vehicle infotainment (IVI) and industrial inspection.  “We are excited to see our powerful Qualcomm processors, the QCS8550 and QCM6490, being utilized in Fibocom's innovative on-device AI solutions,” stated Dev Singh, Vice President of Business Development and Head of building, enterprise & industrial automation at Qualcomm Technologies, Inc. “This collaboration is a testament to our commitment to advancing AI capabilities at the edge, enhancing performance and efficiency across a range of applications from industrial automation to smart retail.”  "It is paramount to master the productivity of AI and create value-added solutions from the edge side for our customers that are in urgent need of building their smart devices based on our solutions. We are thrilled to develop these solutions based on the advanced and powerful chipsets from Qualcomm Technologies, as it not only provides the fundamental architecture of edge intelligence, also enriches flexibility in network connections such as 5G/Wi-Fi/Bluetooth," said Ralph Zhao, VP of MC BU at Fibocom. "In collaboration with Qualcomm Technologies, Fibocom is dedicated to injecting new versatility to the future of intelligence, and accelerating the implementation of our collaboration in robotics, industrial automation, live streaming, and more."
2024-06-18 16:12 阅读量:629
  • 一周热料
  • 紧缺物料秒杀
型号 品牌 询价
MC33074DR2G onsemi
BD71847AMWV-E2 ROHM Semiconductor
CDZVT2R20B ROHM Semiconductor
RB751G-40T2R ROHM Semiconductor
TL431ACLPR Texas Instruments
型号 品牌 抢购
TPS63050YFFR Texas Instruments
STM32F429IGT6 STMicroelectronics
BP3621 ROHM Semiconductor
BU33JA2MNVX-CTL ROHM Semiconductor
ESR03EZPJ151 ROHM Semiconductor
IPZ40N04S5L4R8ATMA1 Infineon Technologies
热门标签
ROHM
Aavid
Averlogic
开发板
SUSUMU
NXP
PCB
传感器
半导体
相关百科
关于我们
AMEYA360微信服务号 AMEYA360微信服务号
AMEYA360商城(www.ameya360.com)上线于2011年,现 有超过3500家优质供应商,收录600万种产品型号数据,100 多万种元器件库存可供选购,产品覆盖MCU+存储器+电源芯 片+IGBT+MOS管+运放+射频蓝牙+传感器+电阻电容电感+ 连接器等多个领域,平台主营业务涵盖电子元器件现货销售、 BOM配单及提供产品配套资料等,为广大客户提供一站式购 销服务。