Weight | G.W 904g |
---|---|
Form factor | Board with 70-pin connector |
Dimensions(Intel Edison for Arduino) | 127.0 x 72.0 x 12.0 mm |
Connector | Hirose DF40 Series (1.5mm, 2.0mm, or 3.0mm stack height) |
Memory type | DDR3, Nand Flash |
ECC Memory supported | NO |
UART | 2 Controllers |
SPI | 1 Controller with 2 chip select |
GPIO | Additional 12 (with 4 capable of PWM) |
Clock Output | 32 KHz, 19.2 MHz |
RAM | 1 GB LPDDR3 POP memory |
WiFi | Broadcom 43340 802.11 a/b/g/n, Dual-band (2.4 and 5 GHz), On board antenna or external antenna SKU configurations |
Input | 3.3V – 4.5V |
Power | Standby (No radios): 13mW, Standby (BT 4.0): 21.5mW, Standby (WiFi): 35 mW |
Arduino IDE, Eclipse supporting | C, C++ & Python, Intel XDK supporting: Node.JS & HTML5 |
Development Environments | MCU SDK and IDE |
Battery | Exclude |
Dimensions(Intel Edison module) | 32.5 x 25.0 x 3.9 mm |
Operating temperature | 0 to 40 degC |
Max Memory size | 4GB |
Physical add. Ext. | 32-bit |
SD Card | 1 interface |
I2C | 2 Controllers |
I2S | 1 Controller |
USB2.0 | 1 OTG Controller |
SoC | 22nm Intel SoC includes: a dual core, dual threaded Intel Atom CPU at 500MHz, and a 32-bit Intel Quark microcontroller at 100 MHz |
Flash Storage | 4 GB eMMC |
Bluetooth | BT 4.0 |
Output | 100ma @3.3V and 100ma @ 1.8V |
CPU OS | Yocto Linux v1.6 |
MCU OS | RTOS |
Battery | Exclude |
Dimensions(Intel Edison module) | 32.5 x 25.0 x 3.9 mm |
Operating temperature | 0 to 40 degC |
Max Memory size | 4GB |
Physical add. Ext. | 32-bit |
SD Card | 1 interface |
I2C | 2 Controllers |
I2S | 1 Controller |
USB2.0 | 1 OTG Controller |
SoC | 22nm Intel SoC includes: a dual core, dual threaded Intel Atom CPU at 500MHz, and a 32-bit Intel Quark microcontroller at 100 MHz |
Flash Storage | 4 GB eMMC |
Bluetooth | BT 4.0 |
Output | 100ma @3.3V and 100ma @ 1.8V |
CPU OS | Yocto Linux v1.6 |
MCU OS | RTOS |
Weight | G.W 904g |
Form factor | Board with 70-pin connector |
Dimensions(Intel Edison for Arduino) | 127.0 x 72.0 x 12.0 mm |
Connector | Hirose DF40 Series (1.5mm, 2.0mm, or 3.0mm stack height) |
Memory type | DDR3, Nand Flash |
ECC Memory supported | NO |
UART | 2 Controllers |
SPI | 1 Controller with 2 chip select |
GPIO | Additional 12 (with 4 capable of PWM) |
Clock Output | 32 KHz, 19.2 MHz |
RAM | 1 GB LPDDR3 POP memory |
WiFi | Broadcom 43340 802.11 a/b/g/n, Dual-band (2.4 and 5 GHz), On board antenna or external antenna SKU configurations |
Input | 3.3V – 4.5V |
Power | Standby (No radios): 13mW, Standby (BT 4.0): 21.5mW, Standby (WiFi): 35 mW |
Arduino IDE, Eclipse supporting | C, C++ & Python, Intel XDK supporting: Node.JS & HTML5 |
Development Environments | MCU SDK and IDE |