ELECTRONIC COMPONENTS SOURCING OPTIONS

发布时间：2023-06-29 15:46
作者：Ameya360
来源：network
阅读量：1756

　　Sourcing high-quality electronic components is essential to create quality products for your brand. Choosing the right parts ensures that your products are functional and useful for end users. However, electronic sourcing isn’t as easy as it seems, especially in the face of supply chain challenges. Sourcing must be handled carefully to ensure you receive high-quality parts for your products. Below, you’ll learn more about sourcing and how to overcome supply chain challenges using different sourcing options.

ELECTRONIC COMPONENTS SOURCING OPTIONS

　　The growth of e-commerce marketplace technology and worldwide original equipment manufacturers is a blessing in disguise for purchasing departments, project managers, engineers, and others involved with tight project deadlines and even tighter budgets.

　　If your purchasing strategy for electronic components could use some fine-tuning, Ameya360 put together a few recommendations to help you maximize ROI, limit expenses, and bolster your bottom line.

　　Transparent, High-Traceability Sourcing

　　Fully transparent, traceable sourcing gives you the confidence you need to trust your procurement partner. Put your trust into digital platforms that rigorously document tracking information, quality inspections, testing reports, and the precise sources of all components.

　　Offers Counterfeit Testing

　　Authenticity must be actively checked, not just verbally guaranteed. Don’t work with a procurement partner unless they offer full component testing for 100% of their products.

　　In-House Laboratory

　　If your distributor has a cutting-edge in-house lab at their disposal, you have the flexibility to customize your testing regimen and the additional trust that there’s no middle-man.

　　IDEA Certified

　　Certifications are proof that your procurement partner is in compliance with widely adopted industry standards.

　　Ameya360 is a leading EMS provider which offers reliable electronic manufacturing services as well as PCB assembly services which has helped clients simplify electronics component procurement. Ameya360 also ensures the fastest turnaround time and product quality. Contact us today to learn more about the services provided by Ameya360.

（备注：文章来源于网络，信息仅供参考，不代表本网站观点，如有侵权请联系删除！）

上一篇：What are the differences between a chip, a semiconductor, and an integrated circuit?

下一篇：Electronic Components Procurement, Top Steps to Follow Procurement

在线留言询价

相关阅读
AMEYA360：How to choose and buy electronic components
Trade news

AMEYA360：How to choose and buy electronic components

　　Electronic components are the basic devices and parts used in electronic devices to achieve specific functions, such as resistors, capacitors, diodes, transistors, etc. Electronic components are the cornerstone of modern electronic technology, they play an important role in various electronic devices and circuits, and also greatly promote the development of science and technology and the progress of human society.　　If you want to know more about the electronic components industry , and how to choose and purchase the right electronic components, this article will summarize the relevant knowledge for you to provide you with a comprehensive understanding and understanding.　　The development trend of electronic components industry　　With the continuous advancement of technology and the continuous change of demand, the electronic components industry is also constantly developing. The electronic components industry is an advanced manufacturing industry, which is not only an important part of the electronics industry, but also involves communications, medical, automobile, home appliances, military and other fields. The following are some of the current trends in the electronic components industry:　　● High-end: The electronic components industry is developing in the direction of high-end and refinement, and high-quality, high-stability, high-precision, high-reliability eelctronic components have become the most popular products in the market.　　● Independent and controllable: The electronic components industry is also developing in the direction of independent and controllable, reducing dependence on external supply, so as to better protect national security and interests.　　● Intelligence: With the continuous development of artificial intelligence, Internet of Things and other technologies, intelligence has become an important trend in the electronic components industry, and electronic components products will be more intelligent in the future and can better serve human life and industrial development.　　● Environmental protection: The electronic components industry is also developing in the direction of greening, environmental protection and sustainable development have become a global consensus, and the electronic components industry also needs to strengthen environmental protection in all aspects of product design, production and recycling to achieve sustainable development.　　The steps of the electronic component procurement　　① Determine the demand: First of all, you need to clarify the model, types(resistors, capacitors, diodes or transistors), specification, quantity and other needs of the electronic components to be purchased, which can be determined according to your own application scenarios and design requirements.　　② Find suppliers: You can find suppliers through search engines, electronic components trading platforms, electronic components mall, etc., and you can choose suppliers with reliable quality and reasonable prices through the comparison of multiple suppliers.　　If you need military electronic components, then you can browse through this article:Top 10 military electronics manufacturers.　　③ Inquiry and negotiation: You can initiate an inquiry to the supplier to understand the price, delivery time, quality and other information, and negotiate according to your own needs.　　④ Place an order: After determining the supplier, price, delivery time and other information, you can place an order to make a purchase.　　⑤ Payment and delivery: After payment, the electronic components supplier will ship the goods according to the agreed delivery period, and the goods need to be inspected and confirmed after receiving the goods.　　The possible problems encountered when components procurement　　● Counterfeit products　　There are a large number of counterfeit components on the market, which are often cheap but of poor quality and can cause circuit failure or danger.　　● Obsolete products　　Some components may be obsolete and no longer manufactured by the manufacturer, but are still available on the market. If these components are purchased, they may lead to obsolescence of the design and affect the performance and reliability of the product.　　● Inconsistent rated parameters　　The performance parameters of the components are usually listed in the data sheet, and if the parameters of the purchased components do not meet the design requirements, it may cause the circuit to be unstable or not working properly.　　● Bad batches　　Due to variations in the manufacturing process, components of the same model may have different batches, and the performance of different batches may vary. If you purchase a bad batch of components, it may cause circuit instability or performance degradation.　　● No suitable spare parts　　In circuit design, it is common to spare critical components in case they fail. Without the right spare parts, failure can lead to production stalls and increased costs.　　The suggestions for purchasing components-Ensure that you buy genuine products and avoid counterfeit products;　　-Pay attention to the production cycle of components and try to avoid buying outdated products;　　-Confirm that the performance parameters of the components meet the design requirements;　　-Understand the differences between different batches of components before purchasing;　　-Suitable spare parts are available in case of component failure.　　It should be noted that low price does not necessarily mean bad quality, but quality and reliability cannot be sacrificed in pursuit of low price. In order to avoid these pitfalls, it is recommended to choose a reliable supplier when purchasing components, ensure that the quality and performance of components meet specifications, try to avoid obsolete products, and stock suitable spare parts in case they are needed.If you need to purchase electronic components, please send email to amall@ameya360.com.
2023-12-01 14:42 阅读量：1911
What is a heat sink in the electronic components?
Trade news

What is a heat sink in the electronic components?

　　In the world of electronic components, heat sinks play a vital role. As a device specifically designed to dissipate the heat generated by electronic components, the heat sink plays an irreplaceable role in maintaining the stability and reliability of electronic equipment. This article will introduce in detail the definition, classification, role and application of heat sinks in electronic components, and discuss their design principles and maintenance methods.　　The definition and function of heat sinkA heat sink is a device used to absorb, conduct, and dissipate heat generated by electronic components. In electronic components, the main functions of the heat sink include:　　Heat dissipation: Heat sinks absorb the heat generated by electronic components and dissipate it into the surrounding environment, thereby preventing electronic components from overheating.　　Prevent component damage: Overheating is one of the main causes of damage to electronic components. By using a heat sink, we can effectively reduce the operating temperature of electronic components, thereby extending their service life.　　Classification of heat sinksDepending on material, form and function, heat sinks can be divided into the following categories:　　Classification according to material: heat sinks can be made of aluminum, copper, steel and other metal materials. Heat sinks made of different materials have different thermal conductivity properties and weight.　　Classification according to form: heat sinks can be divided into flat type, fin type, water-cooled type, etc. Flat-plate heat sinks are suitable for low-power electronic components, fin-type heat sinks are suitable for medium to high-power electronic components, and water-cooled heat sinks are suitable for high-power electronic components.　　According to functional classification: heat sinks can be divided into passive heat sinks and active heat sinks. Passive heat sinks usually use methods such as increasing surface area and heat transfer media to improve heat dissipation efficiency, while active heat sinks use active driving methods such as fans and heat pipes to improve heat dissipation efficiency.　　Application of heat sinks in electronic componentsIn electronic components, heat sinks are widely used in various fields. Here are some specific application examples:　　Integrated Circuits (ICs): In integrated circuits, a large amount of heat is generated due to the high level of integration and dense transistor layout. In order to ensure the normal operation and stability of the IC, a heat sink is usually required for heat dissipation.　　Transistors: Transistors are key components in many electronic devices, and their performance is affected by temperature. By using a heat sink, the operating temperature of the transistor can be reduced, thereby improving its performance and reliability.　　Sensors: Many sensors (such as temperature sensors, touch sensors, etc.) require accurate measurement of ambient temperature or pressure. Using a heat sink can help the sensor maintain stable performance, thereby improving measurement accuracy.　　Design principles and maintenance methods　　Design Principles: When designing and selecting a heat sink, the following factors need to be considered:　　(1)- Structure: The appropriate heat sink structure should be selected according to the shape and size of the electronic components.　　(2)- Materials: Appropriate materials should be selected according to the power of electronic components and the working environment. For example, aluminum and copper have better thermal conductivity, while steel has higher strength.　　(3)- Process: Mature processes should be selected to ensure the quality and reliability of the heat sink.Maintenance methods: To ensure the normal operation of the heat sink and extend its service life, here are some suggestions:　　(1)- Regular cleaning: Regularly remove dust and other impurities on the surface of the heat sink to improve its heat dissipation efficiency.　　(2)- Check fasteners: Regularly check and tighten the fasteners between the heat sink and electronic components to ensure good heat conduction.　　(3)- Replace thermal grease: When the thermal grease is found to be dry or hardened, new thermal grease should be replaced in time to ensure smooth heat conduction.　　(4)- Avoid collisions and vibrations: Try to avoid collisions and vibrations to avoid damage to the heat sink and electronic components.ConclusionIn electronic components, heat sinks play a vital role. By absorbing, conducting and dissipating the heat generated by electronic components, heat sinks help maintain the stability and reliability of electronic equipment. This article details the classification, functions and applications of heat sinks, as well as design and maintenance methods. With the continuous development of science and technology, we can foresee that more new and efficient heat dissipation technologies will be used in the field of electronic components in the future.
2023-11-02 14:58 阅读量：2123
Application of different types of electronic components in circuit design
Trade news

Application of different types of electronic components in circuit design

　　Electronic components are the building blocks of any electronic circuit. They are the fundamental units that are used to create and manipulate electric signals, and they can be combined in various ways to create a wide range of circuits with different functions.In this article, AMEYA360 Chip purchasing network will provide an overview of the different types of electronic components and their applications in circuit design.　　Topics covered:　　Passive components (including resistors, capacitors, and inductors)　　Active components (including transistors, diodes, and operational amplifiers)　　Electromechanical components (including motors, switches, and relays)　　There are three main categories of electronic components: passive components, active components, and electromechanical components.　　Passive components are the simplest type of electronic component. They do not have the ability to amplify or generate an electric current, and they rely on the flow of current from an external source to perform their function. Examples of passive components include resistors, capacitors, and inductors.　　Resistors are one of the most common passive components, and they are used to control the flow of electric current in a circuit. They are typically represented by a set of colored bands on their body, and the colors indicate the resistance value of the resistor. The resistance of a resistor is measured in ohms, and it determines how much the flow of current will be hindered by the resistor.　　Capacitors are another type of passive component, and they are used to store electric charge in a circuit. They are commonly used to smooth out fluctuations in the flow of current, and they can also be used to filter out certain frequencies in a signal. Capacitors are typically made up of two metal plates separated by a dielectric material, and the capacitance of a capacitor is measured in farads.　　Inductors are passive components that are used to store energy in a magnetic field. They are commonly used in circuits to filter out high-frequency signals, and they are also used in power supplies to filter out unwanted noise. Inductors are typically made up of a coil of wire, and the inductance of an inductor is measured in henries.　　Active components, on the other hand, are electronic components that have the ability to amplify or generate an electric current. Examples of active components include transistors, diodes, and operational amplifiers.　　Transistors are active components that are commonly used as switches or amplifiers in circuits. They consist of three layers of semiconductor material, and by applying a voltage to the appropriate layer, the transistor can be used to control the flow of current in a circuit. Transistors are available in a variety of types, including bipolar transistors and field-effect transistors, and they are commonly used in a wide range of applications, from amplifying a small signal to switching high-power loads.　　Diodes are active components that only allow current to flow in one direction. They are commonly used in circuits to protect against voltage spikes, and they are also used in rectifiers to convert alternating current (AC) to direct current (DC). Diodes are available in a variety of types, including signal diodes, rectifier diodes, and zener diodes, and they are commonly used in a wide range of applications, from power supplies to signal processing.　　Operational amplifiers (op-amps) are active electronic components that are commonly used as amplifiers in circuits. They are designed to amplify a small input signal to a larger output signal, and they are used in a wide range of applications, from audio amplifiers to instrumentation amplifiers.　　Operational amplifiers consist of a number of transistors and other components that are arranged in a specific configuration to provide a high-gain amplifier with a high input impedance and a low output impedance. This configuration allows the operational amplifier to amplify small signals without loading the circuit, and it also provides excellent linearity and bandwidth.　　Operational amplifiers are available in a variety of types, including single-ended and differential amplifiers, and they are commonly used in a wide range of applications, from amplifying small signals to driving high-power loads.　　Single-ended operational amplifiers are the most common type of operational amplifier, and they are used to amplify a single input signal. They consist of a single input stage and a single output stage, and they are typically used in applications where the input signal is small and the output signal is not required to be very large.　　Differential operational amplifiers are a type of operational amplifier that is used to amplify the difference between two input signals. They consist of two input stages and a single output stage, and they are typically used in applications where the input signals are large and the output signal is required to be very large.　　Operational amplifiers are commonly used in a wide range of applications, from audio amplifiers to instrumentation amplifiers. In audio amplifiers, operational amplifiers are used to amplify small audio signals to levels that can be heard through a speaker, and in instrumentation amplifiers, operational amplifiers are used to amplify small signals from sensors or other sources to levels that can be measured by a microprocessor or other device.　　Operational amplifiers are also commonly used in feedback circuits, where the output of the operational amplifier is fed back to the input to control the gain or other characteristics of the amplifier. This allows the operational amplifier to perform a wide range of functions, from simple amplifiers to complex filters and oscillators.　　Overall, operational amplifiers are versatile and widely-used active electronic components that are essential for many different circuits and applications.　　Electromechanical components are electronic components that have both electrical and mechanical components. They are used in a wide range of applications, from simple switches to complex motors, and they are an essential part of many different electronic systems.　　Examples of electromechanical components include motors, switches, and relays.　　Motors are electromechanical components that convert electrical energy into mechanical motion. They are commonly used in a variety of applications, from driving the blades of a fan to powering the wheels of a car. Motors are available in a variety of types, including DC motors, AC motors, and stepper motors, and they are commonly used in a wide range of applications, from small devices to large industrial machinery.　　Switches are electromechanical components that are used to control the flow of current in a circuit. They can be operated manually or automatically, and they are used in a wide range of applications, from controlling the power to a light bulb to selecting the gears in a car. Switches are available in a variety of types, including push-button switches, toggle switches, and rotary switches, and they are commonly used in a wide range of applications, from simple circuits to complex systems.　　Relays are electromechanical components that are used to control a circuit by using a small amount of current to operate a switch. They are commonly used in circuits to control high-power devices, such as motors or lights, and they are also used in computer systems to control the flow of data between different components. Relays are available in a variety of types, including electromagnetic relays and solid　　We discussed the three main categories of electronic components: passive components, active components, and electromechanical components. Passive components, such as resistors, capacitors, and inductors, do not have the ability to amplify or generate an electric current, and they rely on the flow of current from an external source to perform their function. Active components, such as transistors, diodes, and operational amplifiers, have the ability to amplify or generate an electric current. Electromechanical components, such as motors, switches, and relays, have both electrical and mechanical components.　　In conclusion, electronic components are the building blocks of electronic circuits, and they are essential for creating and manipulating electric signals. They are available in a wide range of types and sizes, and they can be combined in various ways to create circuits with different functions.　　In addition to the electronic components discussed in this article, there are also integrated circuits, or ICs, which are circuits that are fabricated on a small piece of semiconductor material. ICs are commonly used in a wide range of applications, from microprocessors to memory chips, and they are an essential part of modern electronic systems.
2023-09-12 09:20 阅读量：2064
What are the procurement channels of electronic components
Trade news

What are the procurement channels of electronic components

　　Electronic components are the building blocks of modern technology. They power everything from smartphones and computers to cars and airplanes. However, finding the right electronic components can be a challenging and time-consuming task, even for seasoned veterans at electronics OEMs and EMSes. In this blog post, we will discuss the basics of how to find electronic components and provide some strategies for locating the parts you need.　　One of the best ways to find electronic components is by using online search engines and marketplaces. These platforms can help you quickly locate parts from a variety of manufacturers and suppliers. We will discuss some of the most popular electronic component search engines and marketplaces, and provide tips for using them effectively.　　In addition to online resources, there are other strategies you can use to find electronic components. These include understanding electronic component specifications, using cross-reference tools, and finding alternative or equivalent parts.　　What are the procurement channels of electronic components　　When it comes to finding electronic components, there are several broad options available.　　The first and most popular method is to search online marketplaces and distributors. These platforms offer a wide selection of parts from various manufacturers and suppliers, making it easy to find the parts you need. Some of the most well-known online marketplaces and distributors include AMEYA360. Most electronic manufacturers choose one or two distributors and build trusted relationships with them, going back time and time again for supply.　　Ameya Holding Limited was established in Hong Kong in 2007 and later in 2011, Shanghai Huanghua Information Technology Co., Ltd. was registered, marking the launch of our online platform, AMEYA360 (www.ameya360.com), providing a one-stop solution for electronic component procurement.　　At present, Ameya Holding Limited has secured authorized agency agreements with over 80 renowned original manufacturers, including ROHM, Murata, Panasonic, Taiyo Yuden, Susumu, Rubycon, Renesas (IDH), NXP (IDH), 3Peak, GigaDevice, Novosense, Dioo, and others. They also distribute brands like TI, ADI, ST, Infineon, and Microchip. With a vast network of more than 3,500 high-quality suppliers, AMEYA360 Mall offers an impressive selection of over 8 million types of products available for ordering, with over 5 million components in stock.　　Another option is to use electronic component search engines. These search engines allow you to enter the part number or specifications of the component you need and provide a list of results from multiple sources. Some of the most popular electronic component search engines include Octopart, Findchips, and TrustedParts.　　Larger buyers will often have the option to purchase electronic components directly from manufacturers. This can be a more cost-effective and reliable option for buyers who require large quantities of components or need custom parts that are not readily available through other sources. To purchase components directly from manufacturers, buyers typically need to have a strong relationship with the manufacturer and meet certain minimum order requirements.　　If you are having trouble finding a particular part or need help with procurement, you may want to consider using an electronic component broker. These brokers specialize in sourcing hard-to-find or obsolete parts and can often provide faster and more reliable access to these components than other sources. There’s a huge diversity of brokers in the secondary market, and they can be difficult to trust – but sometimes, they’re the only ones with inventory available.　　The best electronic component search engines　　When using electronic component search engines, it's important to compare results across multiple sources and verify the authenticity and quality of the components you are purchasing. They’re plugged into a much wider section of the market than the authorized distributors, but that sometimes comes at the cost of less accurate data. Top search engines include:　　Octopart: Octopart is a popular electronic component search engine that provides real-time information on pricing, availability, and technical specifications from a variety of manufacturers and distributors. Octopart has a user-friendly interface and powerful search features that allow you to filter results by a range of criteria, including price, quantity, and lead time.　　Findchips: Findchips is another top electronic component search engine that offers a comprehensive database of parts from a wide range of suppliers. It provides detailed information on pricing, availability, and technical specifications for each part, and allows you to compare prices and availability across multiple sources.　　Trustedparts: On the other hand, Trustedparts focuses on hard-to-find and obsolete parts. It provides access to parts from a wide range of suppliers and allows you to search by part number, manufacturer, or keyword. The site also includes tools for cross-referencing and part substitution to help you find alternative components when needed.
2023-09-06 14:52 阅读量：2261
热门分类
盒子，外壳，机架 电缆，电线 电路保护 连接器，互连器件 开发套件 机电产品 嵌入式解决方案 风扇，热管理 光电元件 其它 无源元件 电源 半导体 传感器，变送器 测试与测量
  • 一周热料
  • 紧缺物料秒杀
型号 品牌 询价
MC33074DR2G onsemi
TL431ACLPR Texas Instruments
CDZVT2R20B ROHM Semiconductor
RB751G-40T2R ROHM Semiconductor
BD71847AMWV-E2 ROHM Semiconductor
型号 品牌 抢购
BP3621 ROHM Semiconductor
TPS63050YFFR Texas Instruments
STM32F429IGT6 STMicroelectronics
IPZ40N04S5L4R8ATMA1 Infineon Technologies
BU33JA2MNVX-CTL ROHM Semiconductor
ESR03EZPJ151 ROHM Semiconductor
热门标签
ROHM
Aavid
Averlogic
开发板
SUSUMU
NXP
PCB
传感器
半导体
原厂授权品牌
更多授权品牌>>
资讯排行榜
  • 周排行榜
  • 月排行榜

相关百科
关于我们
AMEYA360微信服务号 AMEYA360微信服务号
AMEYA360商城(www.ameya360.com)上线于2011年，现 有超过3500家优质供应商，收录600万种产品型号数据，100 多万种元器件库存可供选购，产品覆盖MCU+存储器+电源芯 片+IGBT+MOS管+运放+射频蓝牙+传感器+电阻电容电感+ 连接器等多个领域,平台主营业务涵盖电子元器件现货销售、 BOM配单及提供产品配套资料等，为广大客户提供一站式购 销服务。