Murata Electronics 2EG BLUETOOTH® 5.2 Wireless Module

发布时间:2023-09-14 15:09
作者:AMEYA360
来源:网络
阅读量:2433

  Murata Electronics 2EG BLUETOOTH® 5.2 Wireless Module is ultra-small and designed for connected IoT edge devices in industrial and medical applications. This module offers ultra-low power consumption, a rich peripheral interface, an integrated IoT cybersecurity platform, and a power MCU core for user applications. The 2EG wireless module provides a 7mm x 7.4mm x 1mm LGA package, 48MHz Arm® Cortex® M33, onboard antenna and external antenna options, and various I/O interfaces such as UART, QSPI, SPI, GPIO, ADC, DAC, PWM, and I2C. Murata Electronics 2EG Bluetooth 5.2 Wireless Module has an operating temperature range -40°C to +85°C and an input supply range of 1.2V to 3.6V.

Murata Electronics 2EG BLUETOOTH® 5.2 Wireless Module

       FEATURES

  *Powerful MCU core for user applications

  *Ultra-low power consumption

  *Integrated IoT cybersecurity platform

  *Rich peripheral interface

  *Ultra-small size

  *Both onboard and external antenna options

  APPLICATIONS

  *IoT Edge Devices

  *Industrial

  *Medical

  SPECIFICATIONS

  *Bluetooth 5.2

  *Long range

  *2Mbps transmit rate

  *Proximity AoA and AoD

  *Up to 10 simultaneous connections

  *7mm x 7.4mm x 1mm LGA package

  *48MHz Arm Cortex M33

  *80kB RAM, 512kB flash

  *Arm CryptoCell 312

  *-95dBm receive sensitivity at 1Mbps

  *Ultra-Low Power

  *TX at 0dBm 4.3mA

  *RX at 1Mbps 2.7mA

  *40nA sleep mode at 3V VBAT

  *1.2V to 3.6V input supply

  *Shielded resin

  *-40°C to +85°C operating temperature range

  *FCC/ISED, ETSI, and TELEC regulatory certificates

  *UART, QSPI, SPI, GPIO, ADC, DAC, PWM, and I2C interfaces

(备注:文章来源于网络,信息仅供参考,不代表本网站观点,如有侵权请联系删除!)

在线留言询价

相关阅读
Murata SCH1633-D01 Sets a New Standard for Automotive 6DoF Sensor
  Murata is expanding its range of innovative Six Degrees-of-Freedom devices with the introduction of the SCH1633-D01. The micro-electromechanical system (MEMS) based sensor moves the benchmark for performance, system integration, and total cost optimization. It is designed for various automotive applications, including autonomous driving (AD), advanced driver-assistance systems (ADAS), inertial navigation, vehicle stability control, and camera or headlight alignment.  Market Demands  With the increasing push for vehicle autonomy and safety, there is an unquestionable demand for extremely accurate sensors with comprehensive built-in safety features and a high level of integration. Likewise, complying with technical regulations like the UNECE’s headlight leveling regulation requires accurate and cost-optimized solutions – something the SCH1633-D01 has demonstrated it can achieve.  The SCH1633-D01 is a single-package solution optimized for zonal architecture where all required subsystems, like GNSS integration, chassis control, and vehicle attitude sensing (camera and headlight alignment) can utilize its measurements. It is targeted for deployment in the central vehicle inertia measuring unit (IMU) providing a high-quality signal for all subsystems within the vehicle even in the toughest environments. This integration helps to reduce system complexity and provides a much-needed opportunity for cost optimization.  SCH1633-D01 Features  SCH1633-D01 is packaged in a unique 24-pin SOIC housing and uses the SafeSPI 2.0 interface with an up to 20-bit data frame for an extremely smooth and high-resolution output. The component supports various system-level time synchronization features, ensuring that the SCH1633-D01’s output can be easily harnessed across the entire vehicle. Furthermore, the extensive self-diagnostics features utilize over 200 monitoring signals to ensure the output is always trustworthy.  The SCH1633-D01 is designed to provide a high-quality output, even in harsh temperature conditions. It features AEC-Q100 grade 1 qualification to guarantee reliable use throughout the whole component lifetime and is ISO26262 compliant with ASIL-B+ rating (up to ASIL-D via system integration) for exceptional built-in safety.  For further information on the product’s extensive functionality, please visit its detail page here.  Murata’s Recent 6DoF MEMS Success  Murata’s previous generation 6DoF MEMS solution has proven to be highly successful as over 90% of autonomous miles in California alone are driven with the sensor on board. The improvements in this next-generation 6DoF devices are based on customer feedback, and they have already gained global recognition.  The industrial counterpart SCH16T-K01, launched in January this year, has won the first prize in the Industrial & Manufacturing category of the Sensors Converge fair’s “Best of Sensors Award” competition and the SCH1633-D01 preliminary sample feedback has been remarkably positive.  A partner of Murata, Hexagon, has been using the SCH1633-D01 in their products. Gordon Heidinger, Segment Manager, Automotive and Safety-Critical Systems at Hexagon’s Autonomy & Positioning division, remarked, “  The SCH1633-D01 is displaying exceptional performance for a single MEMS sensor. We're pleased to promote this sensor integrated with our positioning solution”.  Murata has also successfully demonstrated that the UNECE headlight leveling regulation can be fulfilled with the SCH1633-D01 sensor in combination with a commercially available alignment algorithm. This is a significant leap towards cost-effective regulation compliance.  “Automotive 6DoF applications are rapidly developing, with fierce competition among manufacturers to capture a share of the market. This product offers high performance, demanded by the latest systems, while also providing a much-needed cost-saving opportunity,” said Ville Nurmiainen, General Manager of Product management at Murata Electronics Oy. He continued, “The SCH1633-D01 will give both a technological and cost down advantage to OEMs choosing to utilize the product to its full potential and will help them to further drive automotive applications forward and create safer roads for us all.”  Preliminary samples are available now. Mass production of this exciting new solution is planned for early 2025.
2024-11-12 11:22 阅读量:685
Murata’s Type 1SC-NTN module achieves Skylo U.S. certification for cellular and non-terrestrial network connectivity
Murata Unveils the World’s Smallest Multilayer Ceramic Capacitor with the First 006003-inch Size (0.16mm×0.08mm) Device
  Murata Manufacturing Co. Ltd has expanded its innovative range of multilayer ceramic capacitors (MLCCs) with yet another groundbreaking addition. Exemplifying Murata’s continual commitment for minimization, it has developed the world’s first 006003-inch size (0.16 mm x 0.08 mm) MLCC. This achievement represents a volume ratio approximately 75% lower than the existing smallest product, the 008004-inch size (0.25×0.125mm).  In recent years, as electronic devices become more sophisticated and compact, the number of electronic components installed has increased, while simultaneously the space required for installation has been reduced. As electronic devices continue to advance in intelligence, there has been a corresponding increase in the incorporation of MLCCs across all types of electronic devices, with the latest smartphones utilizing up to 1000 units. Against this background, there is a growing need for ultra-compact products that enable high-density component mounting with limited mounting space.  Since its inception in 1944, Murata has been committed to the exploration and advancement of ceramic capacitors, nurturing its unparalleled understanding of raw materials, manufacturing processes, and production technologies. In 2014, Murata successfully brought to market the world’s first 008004-inch size (0.25×0.125mm) multilayer ceramic capacitors, which have experienced growing utilization in smartphone modules and wearable devices. The creation of this MLCC is the outcome of years of focused R&D in elemental technologies, resulting in a device that measures just 0.16mm x 0.08mm x 0.08mm (L/W/T).  “Under our slogan 'Innovator in Electronics' we will continue to lead the electronics industry by providing innovative products and developing technologies,” said Hidetoshi Nakagawa, General Manager of Ceramic Capacitor Marketing at Murata Manufacturing Co Ltd. He continued, “This product is another world’s first in a long line of Murata’s market defining MLCCs and will significantly contribute to the future miniaturization and improvement of our customer’s electronic devices.”  This revolutionary product will be showcased at Murata’s booth (6H104) during the CEATEC JAPAN 2024 event, scheduled to take place at Makuhari Messe in Chiba Prefecture on October 15, 2024. For further information on CEATEC 2024 and tickets visit here
2024-09-26 11:09 阅读量:611
Murata:Mass production begins for 0603M size copper electrode NTC thermistors, ideal for automotive applications
  Murata Manufacturing Co., Ltd. (hereinafter “Murata”) has developed 0603M size (0.6 x 0.3 x 0.3 mm) copper electrode NTC thermistors “NCU03XH103F6SRL” and “NCU03XH103F60RL” (hereinafter “this product”) for markets such as the automotive market where there is a demand for high reliability electronic components. This product is an expansion of the NCU series size lineup. Mass production has already begun, and samples can also be provided.  As advances are being made towards automated driving and IoT integration in the automotive market, circuit boards are being made with an increasingly larger number of electronic components, and in turn, higher component densities. With the increasing sophistication of ADAS*1/telematics technologies*2, there are higher loads on electronic components, amplifying the issue of component overheating. As a result, there is a heightened demand for overheating detection and temperature monitoring technologies.  We have taken advantage of Murata’s years of processing technology development experience to create a 0603M size (0.6 x 0.3 x 0.3 mm) product that can be used for high reliability applications. Compared to Murata’s existing products (1005M size), this product has an approximately 80% lower volume and approximately 70% smaller mounting area.  Murata will continue to expand our product lineup to meet market demand. By responding quickly to market demand, we also contribute to further improvements in circuit board component densities and downsizing of devices for high reliability applications.  *1ADAS: Advanced Driver Assistance System  *2Telematics technology: Devices that use communications technology installed in vehicles to collect and transmit driver and vehicle data and share information in real time. Main applications of this technology include navigation systems that collect traffic information to help drivers avoid traffic jams and voice recognition services used to operate in-car features.  Features  Works with automobiles and other systems that require high reliability components. Downsizing (0603M size) achieved with copper electrodes.  Approximately 80% lower volume and approximately 70% smaller mounting area than Murata’s existing products (1005M size). Because this product has the same characteristics as our existing products, there is no need to change the circuit board design when replacing an existing product with this product. This product will also help our customers increase their component density and save space on the circuit board.  Small in volume and capable of fast response.  Specifications
2024-08-28 15:21 阅读量:624
  • 一周热料
  • 紧缺物料秒杀
型号 品牌 询价
TL431ACLPR Texas Instruments
CDZVT2R20B ROHM Semiconductor
MC33074DR2G onsemi
RB751G-40T2R ROHM Semiconductor
BD71847AMWV-E2 ROHM Semiconductor
型号 品牌 抢购
BP3621 ROHM Semiconductor
IPZ40N04S5L4R8ATMA1 Infineon Technologies
TPS63050YFFR Texas Instruments
BU33JA2MNVX-CTL ROHM Semiconductor
ESR03EZPJ151 ROHM Semiconductor
STM32F429IGT6 STMicroelectronics
热门标签
ROHM
Aavid
Averlogic
开发板
SUSUMU
NXP
PCB
传感器
半导体
相关百科
关于我们
AMEYA360微信服务号 AMEYA360微信服务号
AMEYA360商城(www.ameya360.com)上线于2011年,现 有超过3500家优质供应商,收录600万种产品型号数据,100 多万种元器件库存可供选购,产品覆盖MCU+存储器+电源芯 片+IGBT+MOS管+运放+射频蓝牙+传感器+电阻电容电感+ 连接器等多个领域,平台主营业务涵盖电子元器件现货销售、 BOM配单及提供产品配套资料等,为广大客户提供一站式购 销服务。