What is a thick film resistor Advantages of thick film resistors

发布时间:2023-09-18 15:25
作者:AMEYA360
来源:network
阅读量:1938

  What is a thick film resistor?

  Thick film resistors are electronic components that are thicker and have higher resistance quality than thin-film resistors. They are usually made from a layer of thick film-resistive material (chromium, nickel, etc.) that is screen-printed, baked and sintered on a ceramic substrate.

What is a thick film resistor Advantages of thick film resistors

  Thick film resistors have the advantages of wide resistance range and low manufacturing cost. In addition, in high-frequency applications, thick film resistors have better noise characteristics and stability, as well as higher output power. At the same time, thick film resistors also have the characteristics of high temperature, high humidity and high heat resistance, so they are especially widely used in high temperature or harsh environments.

  Thick film resistors are mainly used in current limiting, voltage dividing and circuit calibration in electronic circuits. In some advanced applications in recent years, thick film resistors have also been used in very large-scale integrated circuits (VLSI) technology, such as circuit boards and chip components in embedded systems.

  Advantages of thick film resistorsThick film resistors have the following advantages over thin film resistors:

  1. Wide resistance range: The resistance range of thick film resistors is wider than that of thin film resistors, ranging from a few ohms to hundreds of megohms, and different resistance values can be formulated according to user requirements.

  2. High output power: Thick film resistors have higher output power and can withstand larger currents and powers, which makes them more reliable and stable in high-power applications.

  3. Low manufacturing cost: Thick film resistors have low manufacturing cost, a simple manufacturing process and high production efficiency, so the product price is more economical than thin film resistors.

  4. Strong performance in high temperature, high humidity and heat resistance: Thick film resistors perform better in high temperature, high humidity and heat resistance, and have higher stability in long-term use in harsh environments.

  5. Good reliability: Thick film resistors have stable performance, their functions are not easy to change under normal use, and their reliability is higher than that of thin film resistors.

  Based on the above advantages, thick film resistors are suitable for fields requiring high output power, wide resistance range, high temperature, high humidity and heat resistance, such as automotive electronics, industry, military, aviation, etc.

  What are the applications of thick film resistors?

  Thick film resistors are mainly used in current limiting, voltage dividing and circuit calibration in electronic circuits. The following are common application scenarios for thick film resistors:

  1. Current limiting and voltage dividing applications: Thick film resistors play the role of adjusting the voltage and current in the circuit. They are mainly used to limit, balance and distribute the size of the current to ensure the stability and reliability of the circuit. For example, electronic components in voltage-controlled oscillators require stable resistance values, and sometimes multiple thick film resistors must be connected in a cascade to form a voltage dividing ratio to achieve the goal.

  2. Temperature sensor: Some thick film resistors can be used as temperature sensors to a certain extent because although the resistance value is related to the amount of current, its value is also affected by temperature.

  3. Timers and other applications: Thick film resistors are widely used in various electronic equipment such as timers, frequency meters and current measuring instruments. It can also be used in various applications such as filters, dampers, voltage dividers, voltage drops and calibration circuits.

  4. Embedded systems: In embedded systems, thick film resistors are also widely used in circuit boards, chip components, etc., and are used in control circuits of various embedded systems, such as IoT devices, sensors, etc.

  In general, thick film resistors have a wide range of applications, and their advantages are particularly obvious in practical applications. Their use can effectively improve the performance of electronic circuits and achieve higher stability and reliability requirements.

  How to choose thick film resistors?

  When purchasing thick film resistors, you need to consider the following factors:

  1. Resistance range: Thick film resistors with a wide resistance range can be purchased as needed to select the most suitable resistance value in different application scenarios. Generally speaking, the resistance of thick film resistors ranges from hundreds of ohms to hundreds of megaohms.

  2. Resistance accuracy: The appropriate resistance accuracy needs to be selected according to the accuracy requirements of the circuit. Generally speaking, the resistance accuracy of thick film resistors is between ±1% and ±5%.

  3. Power: The appropriate power needs to be selected based on the current in the circuit and the power supply voltage. Generally speaking, the power of thick film resistors is between 1/4 watts and 5 watts. The greater the power value, the larger the resistor volume.

  4. Temperature coefficient: An appropriate temperature coefficient needs to be selected based on the accuracy requirements of the circuit and the temperature change range in the working environment. Generally speaking, the temperature coefficient of thick film resistors is between ±100ppm/℃ and ±500ppm/℃.

  5. Interface type: The appropriate interface type needs to be selected according to the specific application scenario. For example, some are patch type, suitable for SMT process, and some are plug-in type, suitable for DIP process.

  6. Other special requirements: such as withstanding driving voltage, current and volume, etc. Some application scenarios and requirements for implementing specific functions also require special attention.

  Finally, it is important to note that when purchasing thick film resistors, you need to pay attention to the supplier’s reputation and product quality, purchase products from regular channels, and select appropriate models based on actual needs to ensure that you purchase suitable, reasonably priced, and reliable quality products.

(备注:文章来源于网络,信息仅供参考,不代表本网站观点,如有侵权请联系删除!)

在线留言询价

相关阅读
Understanding Force Sensing Resistor (FSR) Technology
  Force Sensing Resistors (FSRs) represent a critical advancement in sensor technology, offering a versatile and efficient means of measuring force or pressure across a wide range of applications. From consumer electronics to medical devices, automotive systems to robotics, FSRs play a pivotal role in enhancing functionality, safety, and user experience. This article delves into the workings of FSRs, their applications, and the advantages they offer.  What is a Force Sensing Resistor?  A Force Sensing Resistor, also known as a pressure sensor or force-sensitive resistor, is an electronic component whose electrical resistance changes in response to applied force or pressure. Essentially, it’s a thin, flexible, polymer-based material that exhibits a decrease in resistance when pressure is applied to its surface. This change in resistance can be measured and calibrated to determine the magnitude of the applied force.  How do Force Sensing Resistors Work?The fundamental principle behind FSR operation is the conductive polymer material used in its construction. Typically, this material is embedded with conductive particles, and when pressure is applied, the distance between these particles decreases, allowing more current to flow through the sensor. This change in current flow corresponds to a change in resistance, which can be precisely measured.  What’s the applications of Force Sensing Resistors?Human-Machine Interfaces (HMIs): FSRs are extensively used in touch-sensitive interfaces for consumer electronics like smartphones, tablets, and touch-sensitive buttons in appliances. They enable intuitive interaction by detecting the pressure exerted by a user’s touch.  Medical Devices: In medical applications, FSRs are employed in devices such as electronic skin, prosthetics, and pressure-sensitive mats for patient monitoring. They help in measuring pressure distribution for applications like orthopedic rehabilitation or monitoring bedridden patients.  Automotive Systems: FSRs find applications in automotive technologies such as seat occupancy sensors, airbag deployment systems, and touch-sensitive controls in vehicles. They enhance safety by accurately detecting the presence and position of occupants and providing feedback for touch-sensitive controls.  Robotics: FSRs are used in robotics for force feedback systems, grip force sensing in robotic hands, and collision detection. This allows robots to interact safely and accurately with their environment, objects, and humans.  Sports Equipment: FSRs are integrated into sports equipment such as smart insoles, golf club grips, and bicycle handlebars to measure pressure distribution, grip force, and impact forces. This data can be used for performance analysis, injury prevention, and technique improvement.  What’s the advantages of Force Sensing Resistors?Flexibility: FSRs are thin and flexible, making them suitable for applications where space and form factor are constraints.  Low Power Consumption: They typically require low power to operate, making them suitable for battery-powered devices.  High Sensitivity: FSRs exhibit high sensitivity to force or pressure changes, enabling precise measurement across a wide range of forces.  Cost-Effective: Compared to other force sensing technologies like load cells or piezoelectric sensors, FSRs are often more cost-effective, making them a preferred choice for many applications.  Easy Integration: FSRs can be easily integrated into existing electronic systems due to their simple design and compatibility with standard electronic interfaces.  What are the components of Force Sensing Resistors FSR?Force Sensing Resistors (FSRs) typically consist of several components that work together to detect and measure force or pressure. These components include:  Substrate Material: FSRs are usually constructed using a flexible substrate material, often made of polymers like polyethylene or polyvinyl chloride (PVC). This substrate provides the foundation for the sensor and allows it to conform to curved or irregular surfaces.  Conductive Polymer: The key component of an FSR is the conductive polymer layer. This layer is typically applied to the substrate and contains conductive particles dispersed throughout a polymer matrix. When pressure is applied to the sensor, the distance between these particles decreases, leading to a reduction in electrical resistance.  Conductive Traces: FSRs often incorporate conductive traces or electrodes on the substrate, which are used to connect the sensor to external circuitry. These traces provide electrical connections for measuring the resistance of the sensor and transmitting data to a microcontroller or other electronic devices.  Protective Layer: Many FSRs feature a protective layer on top of the conductive polymer to shield it from environmental factors such as moisture, dust, and mechanical damage. This protective layer may be made of materials like silicone rubber or polyimide film.  Connector: In some cases, FSRs may include a connector or terminal for easy integration into electronic systems. This connector allows for quick and secure electrical connections without the need for soldering.
2024-05-29 11:39 阅读量:684
What is thin-film resistor Difference between thin-film resistors and thick-film resistors
  There are many types of resistors. Thin-film resistors are one of the commonly used ones. What are the types of thin-film resistors? What materials are commonly used to make thin-film resistors? In what fields are thin-film resistors mainly used?  What is thin-film resistor?Thin-film resistors are made by evaporating materials with a certain resistivity on the surface of insulating materials using a similar evaporation method. Generally, the insulating material commonly used for this type of resistor is ceramic substrates.  In recent years, with the rapid development of electronic information technology, the development of A/D, D/A conversion circuits and other linear or nonlinear circuits has been rapid. Among them, high-precision operational amplifiers with thin-film resistor networks as the core and high-precision A/D and D/A conversion circuits are essential. In order to improve the accuracy and resolution of ADCs and DACs, the performance of thin-film resistors must also be improved accordingly.  The accuracy and resolution of DAC and ADC mainly depend on the resistor network inside the device. DAC and ADC conversion devices generally use R-2R ladder resistor network. The analysis, research and production of resistor network performance have always been key technologies in the development and production of analog devices. High-precision thin-film resistors have become more and more popular in high-tech fields such as aviation, national defense, electronic computers, communication instruments, and electronic switches due to their excellent characteristics such as high resistivity, low temperature coefficient of resistance, high stability, no parasitic effects, and low noise.  Features of thin-film resistorsTantalum nitride film  Low parasitic capacitance  Good solderability and bonding performance  Temperature coefficient: 150ppm/℃ (-55℃~+125℃)  Rated power 1000mW  Electrode temperature resistance 400℃×10min  Difference between thin-film resistors and thick-film resistorsThin-film Resistors vs Thick-film Resistors  1. Difference in film thickness: The film thickness of thick-film resistors is generally greater than 10 μm, and the film thickness of thin films is less than 10 μm, mostly less than 1 μm;  2. Difference in the manufacturing process: Thick-film resistors generally use a screen printing process, while thin-film resistors use vacuum evaporation, magnetron sputtering and other process methods. The differences in materials and processes between thick-film resistors and thin-film resistors directly lead to differences in performance between the two resistors. Thick-film resistors generally have poor accuracy, with 10%, 5%, and 1% being common accuracy, while thin-film resistors can achieve 0.01% accuracy of one thousandth, 0.1% accuracy of one thousandth, etc. At the same time, the temperature coefficient of thick-film resistors is difficult to control and is generally larger. Similarly, thin-film resistors can achieve a very low temperature coefficient, so that the resistance value changes very little with temperature and the resistance value is stable and reliable. Therefore, thin-film resistors are commonly used in various types of instruments, medical equipment, power supplies, electrical equipment, electronic digital products, etc.  Common thin-film resistors1. Carbon film resistor  Made by depositing crystallized carbon on a ceramic rod skeleton. Carbon film resistors have low cost, stable performance, wide resistance range, and low-temperature coefficient and voltage coefficient. They are currently the most widely used resistors.  2. Metal film resistor  The alloy material is evaporated on the surface of the ceramic rod skeleton using vacuum evaporation. Metal film resistors have higher accuracy, better stability, noise and temperature coefficient correction than carbon film resistors and are widely used in instrumentation and communication equipment.  3. Metal oxide film  A layer of metal oxide is deposited on the insulating rod. Since it is an oxide itself, it is stable at high temperatures, resistant to thermal shock, and has a strong load capacity.  4. Synthetic film resistor  It is obtained by coating a conductive composite suspension on a substrate, so it is also called paint film resistance. Because its conductive layer has a granular structure, it has high noise and low precision. It is mainly used to manufacture high-voltage, high-resistance, and small resistors.
2023-09-18 15:14 阅读量:1834
  • 一周热料
  • 紧缺物料秒杀
型号 品牌 询价
TL431ACLPR Texas Instruments
MC33074DR2G onsemi
RB751G-40T2R ROHM Semiconductor
CDZVT2R20B ROHM Semiconductor
BD71847AMWV-E2 ROHM Semiconductor
型号 品牌 抢购
IPZ40N04S5L4R8ATMA1 Infineon Technologies
STM32F429IGT6 STMicroelectronics
BP3621 ROHM Semiconductor
TPS63050YFFR Texas Instruments
ESR03EZPJ151 ROHM Semiconductor
BU33JA2MNVX-CTL ROHM Semiconductor
热门标签
ROHM
Aavid
Averlogic
开发板
SUSUMU
NXP
PCB
传感器
半导体
相关百科
关于我们
AMEYA360微信服务号 AMEYA360微信服务号
AMEYA360商城(www.ameya360.com)上线于2011年,现 有超过3500家优质供应商,收录600万种产品型号数据,100 多万种元器件库存可供选购,产品覆盖MCU+存储器+电源芯 片+IGBT+MOS管+运放+射频蓝牙+传感器+电阻电容电感+ 连接器等多个领域,平台主营业务涵盖电子元器件现货销售、 BOM配单及提供产品配套资料等,为广大客户提供一站式购 销服务。