Ameya360：Novosense launch High-Performance Isolated CAN Transceiver NSi1050

发布时间：2023-01-17 13:33
作者：Ameya360
来源：网络
阅读量：2806

　　NSi1050 is an isolated CAN transceiver, fully compatible with ISO11898-2 standard. NSi1050 integrates a two-channel digital isolator and a high-performance CAN transceiver. The digital isolator uses silicon oxide isolation based on NOVOSENSE capacitance isolation technology. Highly integrated solutions simplify system design and improve reliability. 

      NSi1050 is UL1577-qualifed for safety, and support 5kVrms dielectric strength, while providing high electromagnetic immunity and low radiation. NSi1050 supports Data rate of up to 1Mbps and can support at least 110 CAN nodes. NSi1050 is designed with thermal protection and transmission data dominant timeout protection.

Ameya360：Novosense launch High-Performance Isolated CAN Transceiver NSi1050

　　Product Features：

　　Fully compatible with ISO11898-2

　　Isolated withstand voltage of 5000Vrms

　　Power supply voltage:

　　oVDD1: 2.5V to 5.5V

　　oVDD2: 4.5V to 5.5V

　　Bus protection voltage -40V to +40V

　　Transmission data (TXD) dominant timeout protection

　　Over current and over heat protection

　　Data rate of up to 1Mbps

　　High CMTI: 100kV/μs

　　Low loop delay: <220ns

　　Enhanced system level ESD, EFT, surge immunity

　　Operation temperature: -40℃~125℃

　　RoHS compliant package: SOW16, DUB8

　　Safety Certificate：

　　UL1577 qualified 5kVrms for 1 min.

　　CQC qualified: Conform to GB4943.1 -2011

　　CSA qualified: Components conform to 5A

　　VDE qualified: DIN V VDE V 0884-11:2017-1

　　Application：

　　Industrial automation system

　　Isolated CAN bus

　　Communication


（备注：文章来源于网络，信息仅供参考，不代表本网站观点，如有侵权请联系删除！）

上一篇：Ameya360:Novosense launch High-reliability four-channel digital isolator NSi824x

下一篇：Ameya360:Skyworks and Sequans Launch Compact LTE-M/NB-IoT SIP Solution

在线留言询价

相关阅读
NOVOSENSE Launches Automotive-Grade High-Side Switches for Body Control Modules and Zone Control Units
Trade news

NOVOSENSE Launches Automotive-Grade High-Side Switches for Body Control Modules and Zone Control Units

　　NOVOSENSE Microelectronics, a semiconductor company specializing in high-performance analog and mixed-signal chips, has announced a range of high-side switches for driving traditional resistive, inductive, and halogen lamp loads in automotive body control modules (BCM) as well as large capacitive loads commonly found in the first-level and second-level power distribution within zone control units (ZCU).　　At time of launch, the NSE34 and NSE35 families includes 26 single-, dual- and quad-channel devices developed for operation across 11 separate load currents intervals (11 A to sub-2 A). These devices have an Rds(on) resistance range from 8 mΩ to 140 mΩ and feature industry-leading load-driving capabilities and advanced diagnostic and protection functions such as advanced over-current protection and over-voltage clamping protection.　　All devices in the two families are fully compliant with multiple automotive standards, including AEC-Q100, AEC-Q100-006, AEC-Q100-012 Grade A, ISO7637, ISO16570 and CISPR25-2021 Class 5.　　Yang WANG, Product Line Marketing Director of NOVOSENSE said: “For electric and autonomous vehicles, body domain controllers have become increasingly important, enabling smart power distribution and functional integration. Indeed, they are essential for many applications, whether in resistive loads such as a seat heater, capacitive or halogen lamp loads for surge-current handling, or inductive loads such as in wipers, solenoids and relays, where it protects against negative voltage spikes.”　　The NSE34 and NSE35 families of high-side switches are available in 14- and 16-pin HSSOP packages measuring 4.9mm x 3.9mm respectively.
2024-11-06 14:11 阅读量：337
NOVOSENSE Introduces the NSIP605x Series of Cost-Effective Push-Pull Transformer Drivers to Support Customers' Diverse and Flexible Designs
Trade news

NOVOSENSE Introduces the NSIP605x Series of Cost-Effective Push-Pull Transformer Drivers to Support Customers' Diverse and Flexible Designs

　　NOVOSENSE today announced the launch of the NSIP605x series of cost-effective push-pull transformer drivers, consisting of NSIP6051 with an output power of 1W and NSIP6055 with an output power of 5W. NSIP6055 is available in two versions: NSIP6055A with a switching frequency of 160kHz, for system applications with more stringent EMI requirements; and NSIP6055B with a switching frequency of 420kHz, for system applications that require improved conversion efficiency and reduced transformer size.　　The cost-effective NSIP605x series is designed for cost-sensitive systems with no particular requirements for footprint size, and offers a higher cost effectiveness than comparable devices with internally integrated transformers while providing similar system performance. The NSIP605x series complements NOVOSENSE's existing product portfolio and supports customers' diverse system design needs with flexible, lightweight configurations in a wide range of industrial, automotive and renewable energy applications.　　Excellent EMI and ESD performance helps reduce system design time　　Thanks to NOVOSENSE's proven EMI optimization technology, the NSIP605x series achieves ultra-low noise and EMI through slew rate control of output switching voltage and spread spectrum clocking (SSC), and the peripheral circuit requires only simple configuration to meet CISPR25 Class 5 requirements. In terms of ESD performance, NSIP605x achieves ±8kV ESD (HBM) and ±2kV ESD (CDM) performance. Excellent EMI and ESD characteristics enable customers to complete overall system debugging more quickly and easily, shortening design time.　　NOVOSENSE's extensive product portfolio meets different design needs　　The NSIP605x series of push-pull transformer drivers is a new addition to the cost-effective product line introduced by NOVOSENSE. NOVOSENSE also offers a selection of other high-performance, highly-integrated products, including: the NSIP88/89xx series and the NIRSP31x series with integrated transformers and multi-channel digital isolators; the NSIP83086 series of isolated RS485 transceivers and the NSIP1042 series of isolated CAN transceivers, integrated with transformers and isolation interfaces. NOVOSENSE's comprehensive product portfolio can meet the diverse system design needs of various types of customers, providing one-stop semiconductor solutions for different customers.
2024-05-21 17:27 阅读量：1141
NOVOSENSE Introduces New Solid State Relays: Supporting 1700V Withstand Voltages and Meeting CISPR25 Class 5 Requirements
Trade news

NOVOSENSE Introduces New Solid State Relays: Supporting 1700V Withstand Voltages and Meeting CISPR25 Class 5 Requirements

　　Building on its long history in isolation technology, NOVOSENSE today announced the launch of its new NSI7258 series of capacitive isolation-based solid state relays, available in both industrial and automotive grades. Designed specifically for high-voltage measurement and insulation monitoring, NSI7258 provides industry-leading voltage withstand capability and EMI performance to help improve the reliability and stability of high-voltage systems such as industrial BMS, PV, energy storage, charging piles, and BMS and OBCs for new energy vehicles.　　Integrated SiC MOSFETs, supporting 1700V withstand voltages　　High-voltage systems are becoming increasingly prevalent in both the industrial and automotive sectors. In order to match the trend of high-voltage industrial and automotive platforms, NSI7258 integrates two SiC MOSFETs developed with NOVOSENSE's participation in a back-to-back format, each supporting up to 1700V withstand voltages; in the standard 1-minute avalanche test, NSI7258 withstands an avalanche voltage of 2100V and an avalanche current of 1mA, achieving industry-leading voltage and avalanche resistance. At the same time, under the test conditions of 1000V high voltage and 125°C high temperature, the leakage current of NSI7258 can be controlled within 1μA, which greatly improves the insulation impedance and detection accuracy of the battery pack in the BMS and enables safer human-machine interaction.　　Compliance with various safety requirements, reducing system verification time　　The popularity of high-voltage applications requires compliance with various stringent safety requirements. With NOVOSENSE's proprietary technology, NSI7258 achieves industry-leading creepage distance of 5.91mm on the secondary side and 8mm on the primary side in a SOW12 package, which meets the requirements of IEC60649 formulated by the International Electrotechnical Commission (IEC). In addition, with NOVOSENSE's superior capacitive isolation technology, NSI7258's voltage withstand capability is up to 5kVrms, which fully meets the relevant UL, CQC and VDE certifications, reducing customers' system verification time and accelerating the product-to-market process.　　Significant EMI optimization, accelerating optocoupler relay replacement　　Traditional optocoupler relay solutions suffer from light decay problems and their performance degrades over time, but the advantage of optocoupler relays is that they have no EMI problems, which is one of the important factors limiting optocoupler replacement in high-voltage systems. NOVOSENSE's NSI7258 is cleverly designed to achieve industry-leading EMI performance, easily passing the CISPR25 Class 5 test without magnetic beads on the single board and leaving sufficient margin in the full-band test. NSI7258 is produced based on an all-semiconductor process for higher reliability in long-term use. Superior EMI performance and increased reliability allow customers to use multiple devices in the system at the same time without being affected, significantly reducing design difficulty and enabling customers to accelerate optocoupler replacement in system designs.
2024-05-20 15:39 阅读量：1292
NOVOSENSE at Automotive World Korea 2024: Enabling Automakers to Create Smarter, Safer Vehicles
Trade news

NOVOSENSE at Automotive World Korea 2024: Enabling Automakers to Create Smarter, Safer Vehicles

　　NOVOSENSE Microelectronics, a global provider of highly robust & reliable analog and mixed signal chip, today announced it will demonstrate the newest additions to its solutions in automotive OBC/DC-DC, traction inverter, BMS, body control module, lighting and thermal management system at the Automotive World Korea from April 24 to 26 at booth D122 in COEX Hall B, Seoul. During exhibition, NOVOSENSE engineer will give presentation about its automotive solutions on April 25.　　Empowering engineers' automotive system design with product innovation　　NOVOSENSE will showcase how its innovative products can help automakers to develop smarter and safer automotive system:　　To support the trends of multi-node, high-speed, and high-stability in-vehicle communication, NOVOSENSE's automotive-grade CAN SIC, NCA1462-Q1, can achieve a transmission rate of ≥8Mbps in a star network, and maintain good signal quality with high EMC performance and patented ringing suppression function.　　More channels are integrated on a single LED driver chip to support the increasing number of LED beads. NOVOSENSE's LED driver integrates up to 24 channels on a single chip, supporting stronger current driving capability and complete circuit protection functions.　　Thermal management systems are transitioning from distributed architectures to integrated architectures. NOVOSENSE's highly integrated small motor driver SoC, NSUC1610, realizes efficient, real-time control of motor applications by integrating an ARM core MCU, a 4-way half-bridge driver, and a LIN interface on a single chip. It is widely used in electronic expansion valves, AGS, and electronic air vents.　　Proven record and automotive-qualified　　Since the launch of its first automotive chip in 2016, NOVOSENSE has always adhered to the “Reliable & Robust” quality policy and implemented Automotive Electronics Council (AEC)’s standards throughout the whole process. With its forward-looking product layout, robust quality performance and proven delivery record, NOVOSENSE has been widely recognized: it obtained ASIL-D certification, the highest level of the TÜV Rheinland ISO 26262 Functional Safety Management System in 2021, and joined the AEC as a member of the Component Technical Committee in 2023.　　With over 10 years’ semiconductor design & mass production experience, NOVOSENSE can offer about 1,800 chip products for sale, and automotive application accounts for about 30% of NOVOSENSE revenue in 2023. NOVOSENSE has built partnership with thousands customers worldwide, including many global automotive OEMs and Tier 1/Tier 2 suppliers.
2024-04-25 11:39 阅读量：1090
热门分类
盒子，外壳，机架 电缆，电线 电路保护 连接器，互连器件 开发套件 机电产品 嵌入式解决方案 风扇，热管理 光电元件 其它 无源元件 电源 半导体 传感器，变送器 测试与测量
  • 一周热料
  • 紧缺物料秒杀
型号 品牌 询价
TL431ACLPR Texas Instruments
CDZVT2R20B ROHM Semiconductor
MC33074DR2G onsemi
RB751G-40T2R ROHM Semiconductor
BD71847AMWV-E2 ROHM Semiconductor
型号 品牌 抢购
ESR03EZPJ151 ROHM Semiconductor
BP3621 ROHM Semiconductor
STM32F429IGT6 STMicroelectronics
BU33JA2MNVX-CTL ROHM Semiconductor
IPZ40N04S5L4R8ATMA1 Infineon Technologies
TPS63050YFFR Texas Instruments
热门标签
ROHM
Aavid
Averlogic
开发板
SUSUMU
NXP
PCB
传感器
半导体
原厂授权品牌
更多授权品牌>>
资讯排行榜
  • 周排行榜
  • 月排行榜

相关百科
关于我们
AMEYA360微信服务号 AMEYA360微信服务号
AMEYA360商城(www.ameya360.com)上线于2011年，现 有超过3500家优质供应商，收录600万种产品型号数据，100 多万种元器件库存可供选购，产品覆盖MCU+存储器+电源芯 片+IGBT+MOS管+运放+射频蓝牙+传感器+电阻电容电感+ 连接器等多个领域,平台主营业务涵盖电子元器件现货销售、 BOM配单及提供产品配套资料等，为广大客户提供一站式购 销服务。