IC Insights Raises 2018 IC Market Forecast from 8% to 15%

发布时间:2018-03-15 00:00
作者:Ameya360
来源:IC Insights
阅读量:1236

  IC Insights’ latest market, unit, and average selling price forecasts for 33 major IC product segments for 2018 through 2022 is included in the March Update to the 2018 McClean Report (MR18).  The Update also includes an analysis of the major semiconductor suppliers’ capital spending plans for this year.

  The biggest adjustments to the original MR18 IC market forecasts were to the memory market; specifically the DRAM and NAND flash segments.  The DRAM and NAND flash memory market growth forecasts for 2018 have been adjusted upward to 37% for DRAM (13% shown in MR18) and 17% for NAND flash (10% shown in MR18).

  The big increase in the DRAM market forecast for 2018 is primarily due to a much stronger ASP expected for this year than was originally forecast.  IC Insights now forecasts that the DRAM ASP will register a 36% jump in 2018 as compared to 2017, when the DRAM ASP surged by an amazing 81%.  Moreover, the NAND flash ASP is forecast to increase 10% this year, after jumping by 45% in 2017.  In contrast to strong DRAM and NAND flash ASP increases, 2018 unit volume growth for these product segments is expected to be up only 1% and 6%, respectively.

  At $99.6 billion, the DRAM market is forecast to be by far the largest single product category in the IC industry in 2018, exceeding the expected NAND flash market ($62.1 billion) by $37.5 billion.  Figure 1 shows that the DRAM market has provided a significant tailwind or headwind for total worldwide IC market growth in four out of the last five years.

  The DRAM market dropped by 8% in 2016, spurred by a 12% decline in ASP, and the DRAM segment became a headwind to worldwide IC market growth that year instead of the tailwind it had been in 2013 and 2014.  As shown, the DRAM market shaved two percentage points off of total IC industry growth in 2016.  In contrast, the DRAM segment boosted total IC market growth last year by nine percentage points.  For 2018, the expected five point positive impact of the DRAM market on total IC market growth is forecast to be much less significant than it was in 2017.

IC Insights Raises 2018 IC Market Forecast from 8% to 15%

FIgure 1

(备注:文章来源于网络,信息仅供参考,不代表本网站观点,如有侵权请联系删除!)

在线留言询价

相关阅读
Choke Inductors What They Are and What They Do
  Have you ever wondered how your phone stays charged or how your car radio delivers crystal-clear sound even on a bumpy road? The answer might lie in a tiny, unassuming component called a choke inductor. While they may not be the flashiest parts in your electronics, choke inductors are critical in ensuring smooth operation and clean power delivery across many devices. In this blog, we will look into the world of choke inductors and explain their function, work, and applications in everyday electronics.  What is a Choke Inductor?  A choke inductor, also commonly referred to as a choke coil inductor or simply a choke, is a passive electronic component that acts like a gatekeeper for electrical current. Unlike its cousin, the resistor, which dissipates energy as heat, a choke inductor manipulates the current flow based on its frequency. Here's the key difference:  Choke inductors: Block high-frequency alternating current (AC) while allowing direct current (DC) and lower-frequency AC to pass through.  Resistors: Resist all current frequencies, reducing the overall current flow and dissipating energy as heat.  This selective filtering property makes choke inductors essential components in various electronic circuits, ensuring clean power delivery and mitigating unwanted electrical noise.  How Does a Choke Inductor Work?  The magic behind choke inductors lies in their ability to generate a magnetic field when current flows through their coil. This magnetic field, in turn, opposes any changes in current. Here's a breakdown:  Current Flow: When current passes through the coil's wire, a magnetic field is generated around it.  Magnetic Field Opposition: According to Faraday's Law of electromagnetic induction, this magnetic field tries to resist changes in the current that created it.  Frequency Dependence: High-frequency AC signals involve rapid changes in the current direction. The opposing magnetic field substantially affects these rapid changes, making it more difficult for the high-frequency AC to pass through the choke.  DC and Low-Frequency AC: The changes in current are slower for direct current (DC) and lower-frequency AC. The opposing magnetic field has less impact, allowing these currents to pass through the choke with minimal hindrance.  Purpose of a Choke Inductor  Choke inductors offer a variety of functionalities in electronic circuits. Here are some of their essentialkey purposes:  Filtering: As mentioned, choke inductors filter out unwanted high-frequency noise from AC signals. This is crucial for ensuring clean power delivery and preventing interference with other components in the circuit.  Energy Storage: Choke inductors can store energy in their magnetic field when current flows through them. This stored energy can then be released back into the circuit when needed. This property is beneficial in circuits requiring power regulation or transient voltage suppression.  Voltage Regulation: Choke inductors can regulate circuit voltage levels with capacitors. By controlling the flow of current and the energy stored within the magnetic field, choke inductors help maintain a stable voltage output.  Types of Choke Inductors  While the basic operating principle remains the same, choke inductors come in various types based on their core material:  Air-Core Chokes: These chokes have an air core that offers low inductance (the ability to store energy magnetically) but works well at high frequencies. They are typically used in RF (radio frequency) circuits.  Iron-Core Chokes: Iron-core chokes provide higher inductance than air-core chokes, making them suitable for applications requiring more energy storage or filtering lower-frequency AC noise. However, they can suffer from core losses at higher frequencies.  Ferrite-Core Chokes: Ferrite is a ceramic material commonly used in choke inductors. It offers a good balance between inductance and core losses, making it a versatile choice for many applications, especially beneficial for high-frequency filtering applications.  Real-World Applications  Choke inductors are ubiquitous in various electronic devices:  Automotive Electronics: They play a vital role in power supplies for car audio systems, engine control units (ECUs), and other electronic components, filtering out noise and ensuring smooth operation.  Power Electronics: Choke inductors are essential in switch-mode power supplies, filtering out switching noise and regulating voltage for various electronic devices.  Radio Frequency (RF) Circuits: In RF circuits, choke inductors prevent unwanted signals from leaking out and interfering with other circuits. This ensures efficient signal transmission and reception.  Final Thoughts  Choke inductors are workhorses in electronics, silently ensuring clean power delivery, signal integrity, and protection from unwanted interference. By understanding their operating principles and various types, you gain valuable insight into the intricate workings of electronic circuits. Whether you're a seasoned engineer or an electronics enthusiast, appreciating the role of choke inductors empowers you to design and troubleshoot circuits more effectively.
2024-05-24 13:26 阅读量:734
Top 10 IC Design Houses’ Combined Revenue Grows 12% in 2023, NVIDIA Takes Lead for the First Time, Says TrendForce
  In 2023, the combined revenue of the world’s top ten IC design houses reached approximately $167.6 billion, marking a 12% annual increase. This growth was primarily driven by NVIDIA, which saw a remarkable 105% increase in revenue, significantly boosting the overall industry. While Broadcom, Will Semiconductor, and MPS experienced only marginal revenue growth, other companies faced declines due to economic downturns and inventory reductions, says TrendForce.  Looking ahead to 2024, TrendForce predicts that with IC inventory levels returning to healthy standards and driven by the AI boom, major CSPs will continue to expand the construction of LLMs. Additionally, AI applications are expected to penetrate personal devices, potentially leading to the introduction of AI-powered smartphones and AI PCs. Consequently, the global IC design industry's revenue growth is expected to continue its upward trajectory.  NVIDIA, Broadcom, and AMD benefit from a surge in demand for AI  The top five IC design houses boosted their 2023 revenues to $55.268 billion—a 105% year-over-year increase—primarily driven by NVIDIA’s AI GPU H100. Currently, NVIDIA captures over 80% of the AI accelerator chip market, and its revenue growth is expected to continue in 2024 with the release of the H200 and next-generation B100/B200/GB200. Broadcom’s revenue reached $28.445 billion in 2023 (semiconductor segment only), growing by 7%, with AI chip income accounting for nearly 15% of its semiconductor solutions. Despite stable wireless communications revenue, Broadcom expects a near-double-digit decline in broadband and server storage connectivity this year.  AMD’s revenue fell by 4% to $22.68 billion in 2023, due to declining PC demand and inventory reductions, affecting most of its business segments. Only its data center and embedded businesses, boosted by the acquisition of Xilinx, grew by 17%. AMD’s AI GPU MI300 series, launched in the fourth quarter of 2023, is expected to be a major revenue driver in 2024.  Conversely, Qualcomm and MediaTek were impacted by the downturn in the smartphone market. Qualcomm’s 2023 revenue decreased by 16% YoY to $30.913 billion (QCT only) due to weak demand in the handheld device and IoT sectors, with China’s smartphone shipments hitting a decade low. However, Qualcomm is actively promoting the automotive market, expecting automotive revenues to more than double by 2030.  MediaTek’s revenue also fell in 2023, dropping 25% YoY to $13.888 billion, with declines in smartphone, power management IC, and smart edge businesses. Nevertheless, due to the adoption of its Dimensity 9300 by several Chinese clients and expected growth in high-end smartphone shipments, the company predicts a return to double-digit growth for all of 2024.  Two significant changes in the ranking from sixth to tenth took place: First, Cirrus Logic fell off the list from its last place spot and was replaced by MPS, whose 2023 revenue rose 4% YoY to $1.821 billion thanks to automotive, enterprise data, and storage computing businesses—offsetting declines in communication and industrial sectors.  Secondly, Realtek’s revenue fell by 19% annually to $3.053 billion in 2023, dropping the company down to eighth place. The decline was mainly due to a sharp decrease in PC shipments, a suspension of telecom tenders in China, and early inventory write-offs. However, after clearing inventory, Realtek saw a slight improvement in PC and automotive shipments in the first quarter of 2024 over networking and consumer electronics. With the launch of WiFi-7 in the third quarter, the restart of telecom tenders, and participation in the development of edge computing frameworks through the Arm alliance, Realtek’s revenues are poised for growth.
2024-05-13 14:48 阅读量:747
Unveiling the Intricacies of IC Design
  In the realm of modern technology, Integrated Circuits (ICs) stand as the cornerstone of electronic innovation. These miniature marvels, also known as microchips or chips, serve as the fundamental building blocks of countless electronic devices, from smartphones and laptops to medical devices and automotive systems. Behind every IC lies a complex process of design and development, encompassing a myriad of disciplines, methodologies, and challenges. In this comprehensive exploration, we delve deep into the fascinating world of IC design.  What is an IC design?At its essence, IC design is the process of creating the blueprint for a microelectronic device that integrates multiple electronic components, such as transistors, capacitors, resistors, and interconnects, onto a single semiconductor substrate. The design process involves translating functional requirements and specifications into a detailed circuit layout that meets performance, power, area, and cost targets. IC designers employ a combination of theoretical knowledge, simulation tools, and engineering principles to conceptualize, model, simulate, and validate complex circuitry.  What are the different styles of IC design?IC design encompasses a diverse range of styles and methodologies tailored to various applications, technologies, and design objectives. These styles of IC design differ in their approach, complexity, and implementation, catering to the specific requirements and constraints of different projects. Here are some common styles of IC design:  Analog IC Design  Digital IC Design  Mixed-Signal IC Design  RF IC Design  Power IC Design  ASIC (Application-Specific Integrated Circuit) Design  FPGA (Field-Programmable Gate Array) Design  System-on-Chip (SoC) Design  How to design an IC?The IC design process encompasses several key stages, each of which contributes to the realization of a functional and manufacturable microelectronic device. These stages typically include:  Specification and Requirements Analysis: Define the functional requirements, performance targets, power constraints, and other specifications for the IC based on market needs and application scenarios.  Architecture Design: Develop the high-level architecture of the IC, including block diagrams, functional partitioning, and interface definitions, to achieve the desired system-level functionality.  Circuit Design: Design and optimize the individual circuit blocks, such as amplifiers, oscillators, logic gates, and memory cells, using analog, digital, and mixed-signal design techniques.  Layout Design: Translate the circuit schematics into a physical layout on the semiconductor substrate, considering factors such as placement, routing, parasitic effects, and manufacturability.  Simulation and Verification: Perform extensive simulation and verification tests to validate the functionality, performance, and reliability of the IC design under various operating conditions and corner cases.  Prototyping and Fabrication: Fabricate prototype ICs using semiconductor manufacturing processes, such as CMOS (Complementary Metal-Oxide-Semiconductor) technology, through foundries or in-house fabrication facilities.  Testing and Characterization: Conduct comprehensive testing and characterization of the fabricated ICs to assess their electrical characteristics, functionality, yield, and adherence to specifications.  Iterative Optimization: Iterate on the design, incorporating feedback from testing and characterization results, to improve performance, yield, and manufacturability for subsequent design iterations.  Which software is used to design IC?  Cadence Virtuoso: Cadence Virtuoso is a widely used platform for analog, digital, and mixed-signal IC design. It offers a comprehensive suite of tools for schematic capture, layout design, simulation, and verification, supporting complex IC design workflows.  Synopsys Design Compiler: Synopsys Design Compiler is a synthesis tool used for RTL (Register Transfer Level) synthesis in digital IC design. It enables designers to convert high-level RTL descriptions into gate-level netlists optimized for area, power, and timing.  Mentor Graphics Calibre: Mentor Graphics Calibre is a suite of tools for physical verification, DRC (Design Rule Check), LVS (Layout versus Schematic), and DFM (Design for Manufacturability) checks in IC design. It ensures compliance with foundry-specific rules and manufacturing constraints.  Ansys HFSS: Ansys HFSS (High-Frequency Structure Simulator) is an electromagnetic simulation tool commonly used for RF (Radio Frequency) and microwave IC design. It enables designers to analyze and optimize the electromagnetic performance of RF circuits, antennas, and interconnects.  Silvaco TCAD: Silvaco TCAD (Technology Computer-Aided Design) is a suite of simulation tools used for process and device simulation in semiconductor fabrication. It allows designers to model semiconductor processes, device behavior, and electrical characteristics at the device level.  Tanner L-Edit: Tanner L-Edit is a layout editor commonly used for analog and mixed-signal IC design. It provides intuitive tools for drawing and editing IC layouts, enabling designers to create complex physical layouts with ease.  Keysight ADS: Keysight ADS (Advanced Design System) is a simulation and design platform for RF, microwave, and high-speed digital IC design. It offers a wide range of simulation capabilities, including harmonic balance, transient analysis, and EM simulation, for RF circuit design and optimization.  CircuitMaker: CircuitMaker is a free, community-driven PCB design tool that can be used for simple IC design and prototyping. It offers basic schematic capture and PCB layout capabilities, making it suitable for hobbyists, students, and small-scale projects.  ConclusionIC design represents the pinnacle of engineering ingenuity and innovation, fueling progress and breakthroughs in diverse fields of technology. From conceptualization to realization, the IC design process embodies a synthesis of creativity, expertise, and perseverance, culminating in the creation of groundbreaking microelectronic devices that power our interconnected world. As technology continues to evolve and redefine the boundaries of possibility, the role of IC design remains indispensable, driving the forefront of innovation and shaping the trajectory of the digital age.
2024-04-29 16:13 阅读量:503
Top Ten IC Design Houses Ride Wave of Seasonal Consumer Demand and Continued AI Boom to See 17.8% Increase in Quarterly Revenue in 3Q23, Says TrendForce
  TrendForce reports that 3Q23 has been a historic quarter for the world’s leading IC design houses as total revenue soared 17.8% to reach a record-breaking US$44.7 billion. This remarkable growth is fueled by a robust season of stockpiling for smartphones and laptops, combined with a rapid acceleration in the shipment of generative AI chips and components. NVIDIA, capitalizing on the AI boom, emerged as the top performer in revenue and market share. Notably, analog IC supplier Cirrus Logic overtook US PMIC manufacturer MPS to snatch the tenth spot, driven by strong demand for smartphone stockpiling.  NVIDIA’s revenue soared 45.7% to US$16.5 billion in the third quarter, bolstered by sustained demand for generative AI and LLMs. Its data center business—accounting for nearly 80% of its revenue—was a key driver in this exceptional growth.  Qualcomm, riding the wave of its newly launched flagship AP Snapdragon 8 Gen 3 and the release of new Android smartphones, saw its third-quarter revenue climb by 2.8% QoQ to around US$7.4 billion. However, NVIDIA’s rapid growth eroded Qualcomm’s market share to 16.5%. Broadcom, with its strategic emphasis on AI server-related products like AI ASIC chips, high-end switches, and network interface cards, along with its seasonal wireless product stockpiling, managed to offset weaker demand in server storage connectivity and broadband. This strategic maneuvering led to a 4.4% QoQ revenue boost to US$7.2 billion.  AMD witnessed an 8.2% increase in its 3Q revenue, reaching US$5.8 billion. This success was due to the widespread adoption of its 4th Gen EPYC server CPUs by cloud and enterprise customers and the favorable impact of seasonal laptop stockpiling. MediaTek's revenue rose by 8.7% to US$3.5 billion in the third quarter, buoyed by a healthy replenishment demand for smartphone APs, WiFi6, and mobile/laptop PMIC components, as inventories across brand clients stabilized.  Cirrus Logic ousts MPS from tenth position thanks to smartphone inventory replenishment  Marvell also made significant gains, with its third-quarter revenue hitting US$1.4 billion, a 4.4% QoQ increase. This growth was primarily driven by increasing demand for generative AI from cloud clients and the expansion of its data center business—despite declines in sectors like enterprise networking and automotive. However, the outlook for some sectors remains mixed, with areas like TV and networking still facing uncertainties, leading to a cautious approach from clients. This resulted in some IC design companies, such as Novatek and Realtek, witnessing a decline in revenues by 7.5% and 1.7%, respectively.  Will Semiconductor benefited from the demand for Android smartphone components, breaking free from past inventory corrections with a 42.3% increase in 3Q revenue to US$752 million. Cirrus Logic, similarly capitalizing on the smartphone component stockpiling trend, saw a significant 51.7% jump in revenue to US$481 million, ousting MPS from the top ten.  In summary, TrendForce forecasts sustained growth for the top ten IC design houses in the upcoming fourth quarter. This optimistic outlook is underpinned by a gradual normalization of inventory levels and a modest seasonal rebound in the smartphone and notebook market. Additionally, the global surge in LLMs extends beyond CSPs, internet companies, and private enterprises, reaching regional countries and small-to-medium businesses, further bolstering this positive revenue trend.
2023-12-22 16:13 阅读量:1819
  • 一周热料
  • 紧缺物料秒杀
型号 品牌 询价
TL431ACLPR Texas Instruments
MC33074DR2G onsemi
CDZVT2R20B ROHM Semiconductor
RB751G-40T2R ROHM Semiconductor
BD71847AMWV-E2 ROHM Semiconductor
型号 品牌 抢购
TPS63050YFFR Texas Instruments
BU33JA2MNVX-CTL ROHM Semiconductor
STM32F429IGT6 STMicroelectronics
IPZ40N04S5L4R8ATMA1 Infineon Technologies
ESR03EZPJ151 ROHM Semiconductor
BP3621 ROHM Semiconductor
热门标签
ROHM
Aavid
Averlogic
开发板
SUSUMU
NXP
PCB
传感器
半导体
相关百科
关于我们
AMEYA360微信服务号 AMEYA360微信服务号
AMEYA360商城(www.ameya360.com)上线于2011年,现 有超过3500家优质供应商,收录600万种产品型号数据,100 多万种元器件库存可供选购,产品覆盖MCU+存储器+电源芯 片+IGBT+MOS管+运放+射频蓝牙+传感器+电阻电容电感+ 连接器等多个领域,平台主营业务涵盖电子元器件现货销售、 BOM配单及提供产品配套资料等,为广大客户提供一站式购 销服务。